The decoder struct should later be made opaque to the decoder plugin,
because maintaining a stable struct ABI is quite difficult. The ABI
should only consist of a small number of stable functions.
Don't use wrappers like player_wakeup_decoder_nb(). These have been
wrappers calling notify.c functions, for compatibility with the
existing code when we migrated to notify.c.
dc_command_finished() is invoked by the decoder thread when it has
finished a command (sent by the player thread). It resets dc.command
and wakes up the player thread. This combination was used at a lot of
places, and by introducing this function, the code will be more
readable.
Busy wait loops are a bad thing, especially when the response time can
be very long - busy waits eat a lot of CPU, and thus slow down the
other thread. Since the other thread will notify us when it's ready,
we can use notify_wait() instead.
Much of the existing code queries all three variables sequentially.
Since only one of them can be set at a time, this can be optimized and
unified by merging all of them into one enum variable. Later, the
"command" checks can be expressed in a "switch" statement.
Since pc->current_song denotes the song which the decoder should use
next, we should move it to DecoderControl. This removes one internal
PlayerControl struct access from the decoder code.
Also add pc.next_song, which is manipulated by the playlist code, and
gets copied to dc.next_song as soon as the decoder is started.
Also enable -Wunused-parameter - this forces us to add the gcc
"unused" attribute to a lot of parameters (mostly library callback
functions), but it's worth it during code refactorizations.
If nothing has been read from the input stream, we don't have to
rewind it.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7397 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The variable "to_read" is never modified except in the last iteration
of the while loop. This means the while condition will never become
false, as the body will break before that may be checked.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7396 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This institutes the usage of a separate thread to buffer HTTP
input. It is basically practice code for using the ringbuffer
code which I plan on reusing for the OutputBuffer as well as
further input buffering for disk (networked filesystems over
WAN, laptops on battery, etc).
Each readFromInputStream() call on an HTTP stream can take
several seconds to complete, short reads are avoided.
A single-threaded solution for systems supporting large enough
SO_RCVBUF values should also be possible and will likely be done
in the future; but this lock-free(except when full/empty)
ringbuffer is cool :)
git-svn-id: https://svn.musicpd.org/mpd/trunk@7393 09075e82-0dd4-0310-85a5-a0d7c8717e4f
We'll be using pipes when waiting for I/O, and condition
variables at other times.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7391 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This will allow both the reader and writer threads to
reset the ringbuffer in a thread-safe fashion.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7390 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This will eliminate unnecessary calls to ringbuf_{read,write}_space
git-svn-id: https://svn.musicpd.org/mpd/trunk@7389 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The auth code also has some ugly usages of string generation
which I will eventually replace with something nicer...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7387 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This piece of code is from the JACK Audio Connection Kit
(trimmed down a bit for better readability).
The vector functions now reuse the common iovec struct used by
writev/readv instead of reinventing an identical but
differently-named struct.
From the comments:
> ISO/POSIX C version of Paul Davis's lock free ringbuffer C++ code.
> This is safe for the case of one read thread and one write thread.
License is LGPL 2.1 or later
git-svn-id: https://svn.musicpd.org/mpd/trunk@7386 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Initialize audioOutput->data with NULL in jack_initDriver().
Previously, this was never initialized, although the other functions
relied on it being NULL prior to jack_openDevice().
This patch addresses bug 0001641[1]. In contrast to the patch provided
by the bug reporter, it moves the initialization before the "!param"
check.
[1] - http://musicpd.org/mantis/view.php?id=1641
git-svn-id: https://svn.musicpd.org/mpd/trunk@7375 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Streaming was broken, beacuse the stream URL was never copied to
path_max_fs.
[ew: replaced strcpy with pathcpy_trunc for ease of auditing]
git-svn-id: https://svn.musicpd.org/mpd/trunk@7371 09075e82-0dd4-0310-85a5-a0d7c8717e4f
During the decoder thread main loop, dc.state must be
DECODE_STATE_STOP. Explicitly assigning it after the "dc.stop" check
is redundant.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7366 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The function wait_main_task() is racy: if the function
wakeup_via_cond() sees the mutex is locked just before
wait_main_task() executes pthread_cond_wait(), the main thread blocks
forever.
Work around this issue by adding a "pending" flag just like in my
notify.c code. A standards-compliant solution should be implemented
later.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7365 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In lazy mode (previously the default), outputBuffer.c only wakes up
the player when it was previously empty. That caused a deadlock when
the player was waiting for buffered_before_play, since the decoder
wouldn't wake up the player when buffered_before_play was reached. In
non-lazy mode, always wake up the player when a new chunk was decoded.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7364 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When we are in an input plugin, dc.current_song should already be
set. Use it instead of pc.current_song.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7363 09075e82-0dd4-0310-85a5-a0d7c8717e4f
We had functions names varied between
outputBufferFoo, fooOutputBuffer, and output_buffer_foo
That was too confusing for my little brain to handle.
And the global variable was somehow named 'cb' instead of
the more obvious 'ob'...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7355 09075e82-0dd4-0310-85a5-a0d7c8717e4f
All of our main singleton data structures are implicitly shared,
so there's no reason to keep passing them around and around in
the stack and making our internal API harder to deal with.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7354 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This at least makes the argument list to a lot of our plugin
functions shorter and removes a good amount of line nois^W^Wcode,
hopefully making things easier to read and follow.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7353 09075e82-0dd4-0310-85a5-a0d7c8717e4f
It actually increases our image size a small bit and may even
hurt performance a very small bit, but makes the code less
verbose and easier to manage.
I don't see a reason for mpd to ever support playing multiple
files at the same time (users can run multiple instances of mpd
if they really want to play Zaireeka, but that's such an edge
case it's not worth ever supporting in our code).
git-svn-id: https://svn.musicpd.org/mpd/trunk@7352 09075e82-0dd4-0310-85a5-a0d7c8717e4f
signal is all we need since we only have one waiter and
likely faster
git-svn-id: https://svn.musicpd.org/mpd/trunk@7349 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The select() in the main event loop blocks now (saving us many
unnecessary wakeups). This interacted badly with the threads
that were trying to wakeup the main task via
pthread_cond_signal() since the main task was not blocked
on a condition variable, but on select().
So now if we detect a need to wakeup the player, we write
to a pipe which select() is watching instead of blindly
calling pthread_cond_signal().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7347 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Since tailChunk() automatically flushes full buffers, we do not have
to check this in every iteration of sendDataToOutputBuffer().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7343 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Checking dc->stop in the while condition and again after the while
loop costs some CPU cycles we should save.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7340 09075e82-0dd4-0310-85a5-a0d7c8717e4f
OutputBuffer.currentChunk contains redundant data: it is either -1
when there is no chunk which is currently being written, or it equals
"end". If we always keep chunk[end] in a valid state, we can remove
OutputBuffer.currentChunk.
This patch may look a bit clumsy, especially flushOutputBuffer(), but
that will be fixed later with an major OutputBuffer API overhaul.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7339 09075e82-0dd4-0310-85a5-a0d7c8717e4f
output_buffer_expand() moves the cb->end to the new position (only its
current successor is allowed) and wakes up the player if is waiting
for the decoder. This simplifies flushOutputBuffer().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7338 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The current OutputBuffer object is allocated statically, i.e. it is
zeroed. To be safe for other cases in the future, also initialize the
other elements.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7337 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The decoder should not wake up the player when it did not produce a
flushed chunk. Move the decoder_wakeup_player() call to
flushOutputBuffer() and invoke it only if the buffer was previously
empty.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7336 09075e82-0dd4-0310-85a5-a0d7c8717e4f
During my tests, it happened that data->position>newPosition. I have
not yet fully understood why this can happen; for now, replace this
with a run-time check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7334 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The patch "convert blocks until the buffer is full" did not update
data->chunk_length correctly: it added the number of samples, not the
number of bytes. Multiply that with bytes_per_channel
git-svn-id: https://svn.musicpd.org/mpd/trunk@7332 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In the patch "special optimized case for 16bit stereo", the check for
"num_channels==2" was missing.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7331 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Not having to loop for every sample byte (depending on a variable
unknown at compile time) saves a lot of CPU cycles. We could consider
reimplementing this function with liboil...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7330 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Read frame->header.channels once, and pass only this integer to
flac_convert().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7329 09075e82-0dd4-0310-85a5-a0d7c8717e4f
flacWrite() is the only function which sets data->chunk_length. If we
flush the buffer before we return, we can assume that it is always
empty upon entering flacWrite().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7328 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Move the inner loop which converts samples to flac_convert(). There
it is isolated and easier to optimize. This function does not have to
worry about buffer boundaries; the caller (i.e. flacWrite())
calculates how much is left and is responsible for flushing. That
saves a lot of superfluous range checks within the loop.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7327 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Check for flushing the chunk buffer only once per sample, before
iterating over channels and bytes. This saves another 5% CPU cycles.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7326 09075e82-0dd4-0310-85a5-a0d7c8717e4f
AudioFormat.bits is volatile, and to read it, 3 pointers had to be
deferenced. Calculate this value once. This speeds up this function
by 5%.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7325 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Try to only include headers which are really needed. We should
particularly check all "headers including other headers". The
long-term goal is to have a manageable, small API for plugins
(decoders, output) without so many mpd internals cluttering the
namespace.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7319 09075e82-0dd4-0310-85a5-a0d7c8717e4f
There is no danger that gcc will optimize access to OutputBufferChunk
properties, since decoder and player work in different chunk objects.
It is safe to remove "volatile" here.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7318 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Less global variables: at any invocation of decoder_sleep(), we have a
reference to the DecoderControl anyway, so we should pass it. This
costs less than having to call getPlayerData() in every tiny
function. Maybe some day we will be able to have multiple decoders at
the same time...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7316 09075e82-0dd4-0310-85a5-a0d7c8717e4f
To do proper cleanup before exiting, we have to provide a destructor
for OutputBuffer. One day, valgrind will not complain about memory
leaks!
git-svn-id: https://svn.musicpd.org/mpd/trunk@7315 09075e82-0dd4-0310-85a5-a0d7c8717e4f
"end" is not being used anymore, since we moved most OutputBuffer
struct accesses into methods.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7314 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Don't be mean with integer sizes. Although we will probably never
have more than 32k buffered chunks, we should use 32 bit integers for
addressing them. We do not save very much (some of the saved space is
eaten by alignment anyway), but we save at least one assembler
instruction for converting short to int.
This change requires some more explicit casts, because gcc was less
picky when comparing short with a full int.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7313 09075e82-0dd4-0310-85a5-a0d7c8717e4f
First patch without camelCase ;)
output_buffer_skip() lets us eliminate advanceOutputBufferTo(), and
removes yet another external OutputBuffer struct access.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7312 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Second patch to make OutputBuffer self-contained: since OutputBuffer
now knows its own size, we do not need the global variable
"buffered_chunks" anymore.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7311 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Try to make OutputBuffer self-contained, without depending on a global
variable.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7310 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This is the first patch in a series which removes the shared memory,
and moves all the playerData objects into the normal libc heap.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7304 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Now that we do proper locking and signalling instead of continuous
polling for IPC, a deadlock was found: at the end of a song, the
player thread waits until the main thread sets pc->queueState from
PLAYER_QUEUE_DECODE to PLAYER_QUEUE_PLAY. He is never woken up, since
syncPlaylistWithQueue() does not activate the notification. I added
wakeup_player_nb() to setQueueState(), since the player must be
signalled whenever pc->queueState changes.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7303 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Buffer sizes should be size_t. This is safe here, at least not
unsafer than without the patch. I have no idea why audioBufferSize
and audioBufferPos were explicitly declared as signed integer.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7296 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When growing the audioOutput->convBuffer, we can use free()+malloc()
instead of realloc(), which saves a memcpy().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7295 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The audio output plugins should get a constant pointer, because they
must not modify the buffer. Since the size is a non-negative buffer
size in bytes, we should change its type to size_t.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7293 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In my previous patch set, I forgot to change the
pcm_sizeOfConvBuffer() invocation in convertAudioFormat() to also use
size_t.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7292 09075e82-0dd4-0310-85a5-a0d7c8717e4f
calculateCrossFadeChunks() still returns int, although the caller uses
it as an unsigned value. Since the function body checks for negative
values, it is safe to cast to unsigned.
crossFade() takes signed parameters, although it callers pass unsigned
integers. Change declaration to unsigned.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7291 09075e82-0dd4-0310-85a5-a0d7c8717e4f
There were some const pointers missing in the previous const-cleanup
patch.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7290 09075e82-0dd4-0310-85a5-a0d7c8717e4f
libfaad wants uint32_t pointers. Passing a long pointer is bugged on
amd64.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7289 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The patch "Start using song pointers in core data structures" removed
dc->utf8url, and the adaption for wavpack_plugin.c was missing.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7288 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The new function successor() can be used to simplify a lot of code
lines and saves a lot of "i+>=buffered_chunks" checks.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7285 09075e82-0dd4-0310-85a5-a0d7c8717e4f
currentChunk is a global variable, which renders the whole output
buffer code non-reentrant. Although this is not a real problem since
there is only one global output buffer currently, we should move it to
the OutputBuffer struct.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7284 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This patch rewrites notify.c to use the pthread API, namely
pthread_mutex and pthread_cond. This is a lot cheaper and easier than
the pipe() hack.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7280 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The code paths which return from the functions all have to call
quitDecode(). If we simply break instead of calling quitDecode()
explicitly, this function gets called in the last line of this
function anyway.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7278 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The multi-line expression which calculates sizeToTime is hard to read,
partly because "cb->audioFormat." is too long. Create a separate
inline function in audio.h for that.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7277 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Moved the decision whether to cross-fade the current song to
calculateCrossFadeChunks(). This simplifies the function
decoderParent() and eliminates one layer of indentation.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7276 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Similar to the crossFade() patch: pass chunk objects to playChunk(),
simplify decodeParent() by removing clutter.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7275 09075e82-0dd4-0310-85a5-a0d7c8717e4f
To unify the decoderParent() main loop some more, use it to wait for
the decoder to change the song. Only one single processDecodeInput()
caller left after this patch.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7273 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When there are not enough decode cross-fade chunks in the buffer yet,
the current code does busy-wait, which will delay the decoder even
more. sleep instead, expecting the decoder to wake us up.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7272 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Calling crossFade() with the chunk objects is easier than unrolling
all the chunk properties manually, and decodeParent() can really use
more of these simplifications.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7271 09075e82-0dd4-0310-85a5-a0d7c8717e4f
sizeof() is the more "natural" or "direct" access to the buffer size,
instead of a macro happening to be used to the buffer declaration.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7270 09075e82-0dd4-0310-85a5-a0d7c8717e4f
To make access to OutputBuffer easier, move everything which belongs
to a chunk into its own structure, namely OutputBufferChunk.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7269 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The chunk size should be in outputBuffer.h since the output buffer
code is its primary user.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7268 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Hiding OutputBuffer internals, again. We get an extra assertion in
return.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7267 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The variable "quit" can be removed, since its only setter can use
"break" instead, just like the other code paths.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7266 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The variables "nextChunk" and "crossFadeChunks" are only used when
doCrossFade==1. This means that we do not have to reset these as long
as doCrossFade!=1.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7265 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The cross-fade check is still very complicated whenever it uses
OutputBuffer internals. Greatly simplify another check by introducing
outputBufferRelative().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7264 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Another "don't use OutputBuffer internals" patch. This ignores the
copied "end" value, but I do not think that has ever been a real
issue.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7263 09075e82-0dd4-0310-85a5-a0d7c8717e4f
decoderParent() uses a lot of OutputBuffer internals to see whether
cross-fading should be started. Move these checks to outputBuffer.c,
which also simplifies decoderParent().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7262 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Declare the variables "test" and "fadePosition" in the scope where
they are really used. This removes some of the clutter in the
function decodeParent().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7261 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Eliminating some duplicated and. This also decreases the number of
lines calling processDecodeInput().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7260 09075e82-0dd4-0310-85a5-a0d7c8717e4f
I have spent some time to understand decodeParent(), which does a lot
of obfuscated magic... I find it useful to help others to also
understand it, so I wrote a few comments.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7259 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Another patch indended to improve the CPP macro hell. This enlarges
the function decodeParent(), but it cannot be converted into a
standalone function easily, because it references so many local
variables.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7258 09075e82-0dd4-0310-85a5-a0d7c8717e4f
clearOutputBuffer() also resets currentChunk; this might resolve a
theoretical bug.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7257 09075e82-0dd4-0310-85a5-a0d7c8717e4f
dc->start cannot be true after the loop, because it was the loop
condition. dc->start could have been set by another thread between
the while loop and the if, but I suspect this is not the case the
author intended, so we just remove the dc->start check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7256 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In my opinion, the code becomes more readable when we explicitly check
"==NOERROR" instead of an implicit 0 check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7255 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Macros are ugly, and multi-line macros are even more ugly. This patch
converts processDecodeInput() to a C function. The disadvantage may
be that the function does not have access to the caller's local
variables, which might be regarded as an advantage on the other hand.
For this reason, we have to pass variable references. This costs a
tiny bit of performance, but it's worth eliminating this monster
macro, and further patches will optimize this cost down.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7254 09075e82-0dd4-0310-85a5-a0d7c8717e4f
since clearPlayerQueue() is always called within
lockPlaylistInteraction() / unlockPlaylistInteraction(), it simplifies
the code to add another function which calls these three functions.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7253 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The block after "if" breaks out of the loop. To make the code a
little bit more readable, don't write the rest in an "else" block,
since this code path does not break.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7251 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The method availableOutputBuffer() calculates how many chunks are in
use. This simplifies code which needs this information, and it can
run without knowing OutputBuffer internals. The function knows how to
calculate this when begin>end; this might have been a bug in
decodeParent(), which does not.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7250 09075e82-0dd4-0310-85a5-a0d7c8717e4f
After the previous patch, it is clear that the loop in
advanceOutputBufferTo() can be replaced with a simple assignment.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7249 09075e82-0dd4-0310-85a5-a0d7c8717e4f
