The tag_id3.c library supports both the documented "TSO2" tag, and the
inofficial TXXX/ALBUMARTISTSORT.
The Vorbis/FLAC decoder automatically supports the new tag, without
further change.
Do all the software volume stuff inside each output thread, not in the
player thread. This allows one software mixer per output device, and
also allows the user to configure the mixer type (hardware or
software) for each audio output.
This moves the global "mixer_type" setting into the "audio_output"
section, deprecating the "mixer_enabled" flag.
Some clients have visual feedback for "database update is running".
Using the "database" idle event is unreliable, because it is only
emitted when the database was actually modified. This patch adds the
"update" event, which is emitted when the update is started, and again
when the update is finished, disregarding whether it has been
modified.
When the filesystem_charset is changed in mpd.conf, MPD should discard
the old database. In this error branch, MPD did not fill the GError
object properly, and logged a warning message instead, which caused a
segmentation fault.
When MPD was paused, and the client sent the "stop" command (or
"clear"), a glitch caused MPD to continue playback for a split second.
This was because audio_output_all_cancel() calls
audio_output_all_update(), which reopens all output devices, and
re-ignites the playback loop.
At the moment mpd doesn't store or restore the current track to/from
its state file when the daemon is stopped/started while in 'stopped'
state. I believe the preferred behaviour would be to store and
restore the current track even when the daemon is in stopped state
when shutting down.
I made a small patch to adapt this behaviour. If you believe this is
not the preferred behaviour, maybe this should be realized as a
configuration option. I'm not sure how to do this, but made a small
comment, where one would have to put the option.
Several users had problems with binding MPD to "localhost". The cause
was duplicate /etc/hosts entries: the resolver library returns
127.0.0.1 twice, and of course, MPD attempts to bind to "both" of
them. This patch makes failures non-fatal, given that at least one
address was bound successfully. This is a workaround; users should
rather fix their /etc/hosts file.
When all audio outputs have been closed due to failures, pause the
playback instead of stopping it. This way, the user may resume
at the current position after the problem has been dealt with.
The "lastfm" input plugin is far from complete, because MPD does not
support nesting playlists yet. The "fluidsynth" decoder plugin
suffers from shortcomings in the libfluidsynth library:
http://www.mail-archive.com/fluid-dev@nongnu.org/msg01099.html
Even if libsamplerate support is enabled, compile the fallback
resampler. When the user specifies the option
"samplerate_converter=internal", it is chosen in favor of
libsamplerate. This may help users with a weak FPU who don't want to
compile a custom MPD from source, because the fallback resampler does
not use floating point operations.
After a seek, wait until enough new chunks are decoded before starting
playback. If this takes too long, send silence chunks to the audio
outputs meanwhile.
This is similar to the MPD 0.14 patch "wait 10 seconds before
reopening a failed device", which only covered open() failures. This
patch adds the same feature for play().
The default values for buffer_time and period_time were both capped by
the hardware limits on practically all chips. The result was a
period_time which was half as big as the buffer_time. On some chips,
this led to lots of underruns when using a high sample rate (192 kHz),
because MPD had very little time to send new samples to ALSA.
A period time which is one fourth of the buffer time turned out to be
much better. If no period_time is configured, see how much
buffer_time the hardware accepts, and try to configure one fourth of
it as period_time, instead of hard-coding the default period_time
value.
This is yet another attempt to provide a solution which is valid for
all sound chips. Using the SND_PCM_NONBLOCK flag also seemed to solve
the underruns, but put a lot more CPU load to MPD.
The lastfm input plugin enables MPD to play lastfm:// URLs. This
plugin is not complete yet: it plays only the first song in the
last.fm playlist, and the playlist parser isn't even implemented
properly.
This is the first patch in a series to enable 32 bit audio samples in
MPD. 32 bit samples are more tricky than 24 bit samples, because the
integer may overflow when you operate on a sample.
The generic sockaddr struct is too small for some addresses. For
accept(), we have to allocate a sockaddr_storage struct on the stack,
which is large enough for all addresses.
Added the uri_remove_auth() library function which strips username
and password from a HTTP URI, and use it in song_print_url(). This
allows you to add HTTP URIs to the playlist including secret username
and password, without disclosing it to all MPD clients.
If mpd.conf specifies a user, and MPD is invoked by exactly this user,
ignore the "user" setting. Don't bother to look up its groups and
don't attempt to change uid, it won't work anyway.
Use delete_directory() for removing sub directories instead of
dirvec_clear(). This ensures that all memory occupied by
subdirectories of deleted directories is freed.
When a directory is deleted, MPD deleted only the directory from the
database; it did not bother to walk the full tree to free all memory
and to remove deleted songs from the playlist. Replace a
dirvec_delete() with delete_directory().
There are a few problems left in this plugin:
- fluidsynth decodes in real time, while MPD prefers to buffer as
quickly as possible; as a workaround, this plugin uses a timer
object to synchronize with real-time playback
- I don't know yet how fluidsynth tells me when the song has ended
- the "soundfont" configuration setting is not yet documented, and it
will likely change soon (in favor of a per-decoder configuration
block)
Don't define HAVE_FFMPEG if the ffmpeg libraries were found via
pkg-config, but ffmpeg support was disabled because
avcodec_decode_audio2() is not available.
Always assume the buffer is empty before calling the encoder. Always
flush the buffer immediately after there has been added something.
This reduces the risk of buffer overruns, because there will never be
a "rest" in the current buffer.
The non-blocking mode of libshout is sparsely documented, and MPD's
implementation had several bugs. Also removed connect throttling
code, that is done by the MPD core since 0.14.
The "current" variable is used for calculating the seek destination,
and was declared as "int". With very long song files, the 32 bit
integer can overflow. ffmpeg expects an int64_t, which is very
unlikely to overflow. Switch to int64_t.
If avcodec_decode_audio2() returns no output for an AVPacket,
libavcodec may buffer some data, and return a larger chunk of output
later. This patch disables a lot of bogus warnings.
The shout_mp3 encoder had two bugs: when no song was ever played, MPD
segfaulted during cleanup. Second bug: memory leak, each time the
shout device was opened, lame_init() was called again, and
lame_close() is only called once during shutdown.
Fix this by shutting down LAME each time the clear_encoder() method is
called.
Hi -
independently of libmikmod's other problems - there seems
to be a problem in mpd's wrapper: MikMod_Exit() is called
after the first file is decoded, which frees some ressources
within the mikmod library. An attempt to play a second file
leads to a crash. The appended patch fixes this for me.
(I don't know what the "dup" entry is good for - someone
who knows should review that too.)
best regards
Matthias
[mk: removed 3 more MikMod_Exit() invocations]
When the user configures a music_directory with a trailing slash, it
may break playlist loading, because MPD expects a double slash. Chop
off the trailing slash.
ffmpeg_tag_internal() does not look for a few tags that mpd
supports. Most noteably:
comment -> TAG_ITEM_COMMENT -> Description
genre -> TAG_ITEM_GENRE -> WM/Genre (not WM/GenreID)
year -> TAG_ITEM_DATE -> WM/Year
I *think* that this is the last of the tags that AVFormatContext() in
ffmpeg supports that mpd also uses.
This patch implements the MMS protocol, by using libmms. It is quite
experimental: it does not support seeking yet, and it is currently
using synchronous I/O, which causes MPD to hang while waiting for the
server.
When waiting for free space in the ring buffer, the JACK plugin
sleeped 10ms until there is enough space. This delay was too large
for low-latency setups (<10ms), and created a lot of xruns. Work
around that by reducing the sleep time to 1ms.
A proper solution for this would be to use an event based approach,
and we will do it, just not now.
When the connection failed once, you had to restart MPD, because it
never cleared the jack_data.shutdown flag. Instead, it refused to
play anything "because there is no client thread" (which is wrong at
that point).
Added all important id tags from the MusicBrainz wiki:
http://musicbrainz.org/doc/MusicBrainzTag
This should automatically enable its suport in the vorbis and flac
decoder plugins.
When the random mode is toggled, MPD did not clear the queue. Because
of this, MPD continued with the next (random or non-random) song
according to the previous mode. Clear the queued song to fix that.
The null plugin synchronizes the playback so it will happen in real
time. This patch adds a configuration option which disables this: the
playback will then be as fast as possible. This can be useful to
profile MPD.
When libvorbis knows that a song is seekable, it seeks around like
crazy in the file before starting to decode it. This is very
expensive on remote HTTP resources, and delays MPD for 10 or 20
seconds.
This patch disables seeking on remote songs, because the advantages of
quickly playing a song seem to weigh more than the theoretical ability
of seeking for most MPD users. If users feel this feature is needed,
we will make a configuration option for that.
When a song file is deleted during database update, all pointers to it
must be removed from the playlist. The "for" loop in
deleteASongFromPlaylist() did not deal with multiple copies of the
deleted song properly, and left instances of the (to-be-invalidated)
pointer in. Fix this by reversing the loop.
If http_proxy_{host, port, user, password} are provided in mpd.conf
they are not passed on to libcurl. As a result mpd cannot stream from
behind an http proxy.
The attached patch `http_proxy.patch` makes the relevant calls to
curl_easy_setopt(...) for all proxy configuration parameters, but is
only tested for host and port.
When the decoder of the new song is not fast enough, the player thread
has to wait for it for a moment. However the variable "nextChunk" was
reset to -1 during that, making the next loop iteration assume that
cross-fading has not begun yet. This patch overwrites it with "0"
while waiting.
This patch fixes a minor memory leak: when decoder_tag() attempted to
send a merged tag object (created by tag_add_stream_tags()), and was
interrupted by a decoder command, it did not free the temporary merged
tag object.
