The Naim Uniti does not appear to support icecast-style streaming of FLAC
music but does support the codec from a DLNA server. This change looks for
"transferMode.dlna.org: Streaming" in the HTTP request header and responds
with something the Uniti (and hopefully other DLNA clients) accepts.
The only difference in the DLNA streaming mode is the reponse header and
that icecast metadata is disabled. If a client request indicates both modes
are supported, the DLNA mode is preferred (as the Uniti says it supports
both but then rejects a FLAC ICY stream).
Note: This change may be specific to Naim equipment (the only device it was
tested on). E.g. the hardcoding of Content-Length which works but is not a
logically correct value. The change should be backwards-compatible, so
only those clients requesting a DLNA stream will see any difference.
When playing a CUE track, the player thread waited for the decoder to
become ready, and then sent a SEEK command to the beginning of the CUE
track. If that is near the start of the song file, and the track is
short enough, the decoder could have finished decoding already at that
point, and seeking fails.
This commit makes this initial seek more robust: instead of letting
the player thread deal with the difficult timings, let the decoder API
emulate a SEEK command, and return it to the decoder plugin, as soon
as the plugin finishes its initialization.
Add GMutex, GCond attributes which will be used by callers to
conditionally wait on the stream.
Remove the (now-useless) plugin method buffer(), wait on GCond
instead. Lock the input_stream before each method call. Do the same
with the playlist plugins.
D'oh, we were reading 16 bit integers instead of 32 bit integers!
That caused silence when trying to play a 32 bit input file on a 24
bit sound card (e.g. USB sound chips with 24 bit packed samples).
Don't abort the configure script when avahi could not be
auto-detected. It previously did, because there was no custom "fail"
action for PKG_CHECK_MODULES.
The output thread could hang indefinitely after finishing CANCEL,
because it could have missed the signal while the output was not
unlocked in ao_command_finished().
This patch removes the wait() call after CANCEL, and adds the flag
"allow_play" instead. While this flag is set, playback is skipped.
With this flag, there will not be any excess wait() call after the
pipe has been cleared.
This patch fixes a bug that causes mpd to discontinue playback after
seeking, due to the race condition described above.
To demonstrate the new I/O thread. libsoup is well-integrated into
the GLib main loop, which made this plugin pretty easy to write.
As a side effect, we have to initialize the I/O thread in all debug
programs that use the input API.
This warning should only be logged when we really received something.
When the client disconnects, G_IO_IN is triggered, and the read
returns G_IO_STATUS_EOF.
In the "vorbis" plugin, this is a copy of the old flush() method,
while flush() gets a lot of code remove, it just sets the "flush" flag
and nothing else. It doesn't start a new stream now, which should fix
a few problems in some players.
This makes FreeBSD detect libogg correctly. The '==' operator is an
undocumented GNU extension to test(1) and cannot be relied upon to
exist and do the right thing. POSIX mandates string comparisons to be
done using "test foo = bar".
From http://bugs.debian.org/513291
"In mpd.conf, the "admin" permission covers updating the db and
killing mpd.
"Since there are quite some usecases in which the user can upload
music to the mpd's directory by means of anonymous FTP or so, it is
desirable that any user may issue a db update, while killing the mpd
should not be possible.
"I'd suggest to remove the db update from the admin group and either
add it to "control" or an own group."
With mono sound, jack_sample_size is smaller than frame_size (4 vs 2
bytes), and "space/jack_sample_size==0". That means mpd_jack_play()
will return 0, although no error has occurred.
Version 1.0.0 of the libao library added a new field to the
ao_sample_format struct. It is a char * named matrix. When
an ao_sample_format is allocated on the stack, this field contains
garbage. The proper course is to insure that is initialized to NULL.
NULL indicates that we do not want any mapping.
The struct is now initialized using a static initializer, and this
technique is compatible with all known versions of libao.
This fixes the following valgrind warning occuring on the first call of
httpd_output_read_page:
==20124== Conditional jump or move depends on uninitialised value(s)
==20124== at 0x425E65: httpd_output_read_page (httpd_output_plugin.c:240)
==20124== by 0x426087: httpd_output_open (httpd_output_plugin.c:279)
==20124== by 0x41D862: ao_open (output_plugin.h:206)
==20124== by 0x41E133: audio_output_task (output_thread.c:590)
I wanted mpd to play a mp3 stream from a music website. The stream is
only available to subscribers, which restriction is enforced through
normal http authentication. However, the URL I get from the website
is not the final URL of the stream, but a generic URL which points to
the real one through a redirect (code 301). Thus, I cannot predict
the final URL, and so I cannot use the username:password hack to force
the authentication, and mpd (libcurl on mpds behalf) fails to grab the
stream.
libcurl allows the option CURLOPT_NETRC to be set and then the
credentials can be stored in the good old .netrc file (in this case it
would be ~mpd/.netrc, of course). But mpd doesn't set this option. I
think it should.
When a music_chunk to be crossfaded consists only of a tag,
cross-fading is not possible, and led to an assertion failure. This
patch just discards those, as if cross-fading was not enabled.
During the whole output thread, the audio_output object is locked, and
it is only unlocked while waiting for the GCond and while running a
plugin method. The error handler in ao_play_chunk() attempted to lock
the object again, which was code from MPD 0.15.x which should have
been removed a long time ago.
Until the decoder plugin has called decoder_initialized(), the player
may not submit seek commands. This however could occur with a slow
decoder and a CUE file with a virtual song offset. This patch adds
another check.
When you don't explicitly set an output sample rate, liblame tries to
guess an output sample rate from the input sample rate. You would
think that this "guessing" consists of just setting both equal, but
that is not the case. For 44.1kHz at 96kbit/s, liblame chooses
32kHz. This patch explicitly configures the output sample rate, to
stop the bad guessing.
This is a MPD 0.16 regression: when playing a 24 bit file, the switch
to 16 bit was made only partially, after mBytesPerPacket and
mBytesPerFrame had already been applied.
That means mBytesPerFrame referred to 24 bit, and mBitsPerChannel
referred to 16 bits. Of course, that cannot work.
Rename the "version" struct, because it seems to be a reserved name on
Solaris:
"src/decoder/mad_decoder_plugin.c", line 550: (enum) tag redeclared: version
cc: acomp failed for src/decoder/mad_decoder_plugin.c
Add new config parameter 'device' to audio_output type "osx":
- if not supplied or set to "default", open default device
- if set to "system", open system device
- otherwise 'device' should be an audio device name: mpd will find and
open the specified audio device, falling back to the default
device if it's not found
After popular demand, I've switched the order of "artist" and "title"
in the stream title. There is no standard, and there is no reliable
way to parse those from the stream title.
When one song is played twice, and the decoder is working on the
second "instance", but the first should be seeked, the check in
player_seek_decoder() may assume that it can reuse the decoder without
exchanging pipes. The last thing was the mistake: the pipe pointer
was different, which led to an assertion failure. This patch adds
another check which exchanges the player pipe.
Change the assertion on "fail_timer==NULL" in OPEN to a runtime check.
This assertion crashed when the output thread failed while the player
thread was calling audio_output_open().
Added support for a new optional configuration setting for the httpd output
named "bind_to_address". Setting it to a specific IP address (v4 or v6) will
cause the httpd output to bind to that address exclusively. Supporting
multiple addresses in parallel is future work.
This implements the feature requests #2998 and #2646.
Clear the notification before finishing the CANCEL command, so the
notify_wait() after that will always wait for the right notification,
sent by audio_output_all_cancel().
Some users reported that MPD crashes when using a new CURL version
with the threaded DNS resolver enabled. It seems that
curl_multi_fdset() returns no file descriptor when the DNS resolver
runs in another thread, so MPD does not have any event to wait for.
On the CURL mailing list, somebody suggested to sleep for a fixed
amount of time. This is not an elegant solution, because daemons
should never have to sleep without waiting for an event. I hope the
CURL developers will review the API and remove the threaded DNS
resolver.
Meanwhile, I'm removing the assertion in question, to allow those
unfortunate users running the latest CURL version to continue using
MPD.
In libwildmidi 0.2.3, the function WildMidi_SampledSeek() was removed,
without changing the SO name. This patch adds an autoconf check for
that function. Fall back to WildMidi_FastSeek() if
WildMidi_SampledSeek() is not available anymore.
libavformat 0.6 does not pass the original URI pointer to the "open"
method, which leads to a crash because MPD was using a dirty hack to
pass a pointer to that method.
This patch switches to av_open_input_stream() with a custom
ByteIOContext class, instead of doing the URI string hack with
av_open_input_file().
Loosely based on a patch from Jasper St. Pierre.
I've attached a patch that will make file URIs work on operating systems
that provide the getpeereid() function call to check the user ID of the
peer connected to a UNIX domain socket.
I took this tag name from a MusePack sample file I got from a user.
It is not documented in the APE specification:
http://wiki.hydrogenaudio.org/index.php?title=APE_key
People seem to be using undocumented extensions to the specification
anyway, and the best we can do is attempt to support them.
I took these tag names from a MusePack sample file I got from a user.
These are not documented in the APE specification:
http://wiki.hydrogenaudio.org/index.php?title=APE_key
People seem to be using undocumented extensions to the specification
anyway, and the best we can do is attempt to support them.
Without libid3tag, we were trying to skip the ID3 frame (since
0.15.2). Its length however was not calculated at all, we were just
dropping everything from the current input buffer. This lead to the
first few seconds of the file being skipped. This patch attempts to
calculate the ID3v2 frame size with the formula from:
http://www.id3.org/id3v2.4.0-structure 3.1 and 6.2
"When playing musepack files with mpd v0.15.8, rg seems to have no effect.
Using sample file below, mpd says 'computing ReplayGain album scale with gain 122.879997, peak 0.549150'.
One thing though, if I build mpd against old libmpcdec-1.2.6, rg works
as expected: 'computing ReplayGain album scale with gain 16.820000,
peak 0.099765'"
Previously, tags of the new song being cross-faded in were sent
immediately. That can cause wrong information being displayed,
because the "previous" song might send its tag at the end again,
overriding the "next" song's tag. This patch saves & merges the tag
of the next song, and sends it when cross-fading is finished, and the
next song really starts.
"There is a bug in fixed-point musepack (musepack_src_r435) playback.
In floating-point audio is OK but in fixed audio is distorted. I have
made a patch for this"
With single+repeat enabled, it is expected that MPD repeats the
current song over andd over. With random mode also enabled, this
didn't work, because the song order was shuffled internally. This
patch adds a special check for this case.
This is a very basic check, which only ensures that the path does not
begin with a slash, doesn't have double slashes and the special names
"." and ".." are forbidden.
Removed the decoder_command_finished() call at the end of
mp3_decode(). This is invalid, because decoder_command_finished() has
already been called in mp3_read().
Add an option for each audio output which enables the use of the
hardware mixer, instead of the software volume code.
This is hardware specific, and assumes linear volume control. This is
not the case for hardware mixers which were tested, making this patch
somewhat useless, but we will use it to experiment with the settings,
to find a good solution.
Apply the replay gain in the output thread. This means a new setting
will be active instantly, without going through the whole music pipe.
And we might have different replay gain settings for each audio output
device.
When all plugins have failed, MPD used to fall back to the "mad"
decoder plugin, to handle those radio streams without a Content-Type
response header. This however leads to unexpected results (garbage
being played) when the stream isn't really mp3. Since we care little
about "bad" streams, we shouldn't have hacks which have bad side
effects.
Let's get rid of this hack now! Only try to "mad" plugin if there was
no match at all (Content-Type, path suffix) and no other plugin has
been tried.
To allow libavformat to detect the format of the input file, append
the suffix of the input file to the URL of the virtual stream. This
specifically enables the "shorten" codec, which is supported by
libavformat/raw.c, detected only by the suffix.
The patch "input/file: don't fall back to parent directory" introduced
a regression: when trying to play a CUE track, decoder_run_song()
tries to open the file as a stream first, but this fails, because the
path is virtual.
This patch fixes decoder_run_song() (instead of reverting the previous
patch) to accept input_stream_open() failures if the song is a local
file. It passes the responsibility to handle non-existing files to
the decoder's file_decode() method.
This replaces the rewinding buffer code from the CURL input plugin.
It is more generic, and allows rewinding even when the server sends
Icy-Metadata (which would have been too difficult to implement within
the CURL plugin).
This is a rather complex patch for the stable branch (v0.15.x), but it
fixes a serious problem: the "vorbis" decoder plugin was unable to
play streams with Icy-Metadata, because it couldn't rewind the stream
after detecting the codec (Vorbis vs. FLAC).
When collecting tag values for the result set, add all of a song's tag
values of the searched type. This affects the "list" command.
Previously, "list" only considered the first tag value of a song.
Don't clear the music pipe when seeking has failed - check the
"seeking" flag instead of "command==SEEK". Clear the "seeking" flag
in decoder_seek_error().
Use the plugin instead of the glue code in normalize.c. This is used
wrapped inside a "autoconv" filter, to enable normalization for all
input file formats.
Fixes a memory leak: the "archive" input plugin opens the archive, but
never closes it. This patch moves the responsibility for doing that
to archive_plugin.open_stream(). This is an slight internal API
change, but it is the simplest and least intrusive fix for the memory
leak.
This fixes an inconsistency in the stored playlist subsystem: when
obtaining the list of playlists (listplaylist, listplaylistinfo), the
file names in the playlist directory are converted to UTF-8 (according
to filesystem_charset), but when saving or loading playlists, the
filesystem_charset setting was ignored.
The plugin code tried to force libavcodec to supply stereo samples.
That however has never actually worked. By removing this code, we are
able to play surround files for the first time.
Allow RIFF/AIFF ID3 tags up to 4 MB (old limit was 256 kB). This
might still be too small for some users, and when somebody complains,
we might do something more clever (like streaming the data into
libid3tag?).
On some platforms, libavcodec wants the output buffer aligned to 16
bytes (because it uses SSE/Altivec internally). It will segfault when
you don't obey this rule.
MPD has been supporting 32 bit samples since version 0.15. This patch
changes one check, and removes the 32->24 conversion code.
Note that WavPack floating point samples have 32 bits, and MPD doesn't
have a special check for floating point - therefore, this WavPack
plugin still returns 24 bit integer samples as before (until we have
float support in the MPD core).
If flac_container_decode() gets a seek destination which is out of
range, it ignores the SEEK command (never finishes it). This leads to
MPD lockup, because the player thread waits for completion.
Drop the required GLib version from 2.16 to 2.12, because many current
systems still don't have GLib 2.16. This requires several new
compatibility functions in glib_compat.h.
Max Kellermann