3c4fe8cc04
doc/user: fix typo
2015-08-11 18:57:50 +02:00
ccdb94b06c
configure.ac: remove GLib option
...
Not used anymore.
2015-06-27 16:06:28 +02:00
d5cfa6d4dc
TagId3: remove the "id3v1_encoding" setting
...
Drop support for misencoded tags. People should not be using ID3v1
anyway.
2015-06-26 00:15:24 +02:00
3f4908c363
doc/doxygen.conf: strip absolute path name
2015-03-17 12:15:38 +01:00
dd0f1d9d2d
doc/doxygen.conf: "doxygen -u" with 1.8.8
2015-03-17 12:11:58 +01:00
b31d171ae8
*: doxygen fixups
2015-03-17 11:21:43 +01:00
085f06594c
doc/doxygen.conf: disable WARN_IF_UNDOCUMENTED, too much noise
2015-03-17 11:21:43 +01:00
ce3d41052c
doc/doxygen.conf: remove DOT_FONTNAME (font name was obsolete)
2015-03-17 10:50:23 +01:00
44f3df697f
doc/doxygen.conf: scan headers recursively
2015-03-17 10:47:53 +01:00
28c75b2283
doc/doxygen.conf: generate documentation for C++ headers
2015-03-17 10:46:35 +01:00
b6e56119c4
doc/doxygen.conf: remove obsolete settings
2015-03-17 10:45:41 +01:00
a0e29b5435
doc/doxygen.conf: remove XML section
...
It's disabled anyway.
2015-03-17 10:43:51 +01:00
676dfabc91
command/{Queue,File}Commands: drop "file:///" prefix for absolute paths
...
Requiring this prefix makes the client's intention very clear, but it
was too hard to understand why this prefix was needed. Initially, my
intention was to differentiate from broken clients which prefix relate
URIs with a slash; once MPD allowed that. In the past few years
however, MPD has disallowed that, and there was no significant
breakage (except for the "add /" special case which some clients
apparently still do). So I figure it's about time to define that an
URI that begins with a slash points to an arbitrary file on the file
system.
2015-02-09 07:55:06 +01:00
ae7e1a22cb
Merge branch 'v0.19.x'
2015-01-26 20:57:29 +01:00
a289dcb9ee
Merge branch 'v0.18.x' into v0.19.x
2015-01-26 20:48:19 +01:00
ad1b6ef0ac
{playlist,input}/despotify: remove defunct plugin
2015-01-26 09:55:31 +01:00
72e44d596f
tag/Format: add %iso8601%
2015-01-22 19:10:15 +01:00
6cd5d73607
pcm/SoxrResampler: allow multi-threaded resampling
2015-01-22 11:37:18 +01:00
0d3b26b3aa
Config: add section "resampler"
2015-01-22 11:04:28 +01:00
52acea7b1f
doc/user: move resampler list to the plugin reference section
2015-01-22 11:04:28 +01:00
384b6c8288
doc/protocol: "playlistsearch" is case insensitive
2015-01-16 17:27:19 +01:00
1d8544ef3b
db/plugins/ProxyDatabasePlugin: add "keepalive" parameter
2015-01-15 14:44:55 -08:00
e8debd2e45
output/recorder: dynamic file name
2015-01-14 22:03:26 +01:00
6e8ea2a2cb
doc/protocol.xml: Fix a typo
2015-01-14 12:28:09 +01:00
412bedb697
Merge branch 'v0.19.x'
2014-12-26 14:40:32 +01:00
5b84c99d79
doc/user: remove autoconf/automake from Debian build dependencies
2014-12-26 14:00:50 +01:00
b295024574
doc/user: add more Debian build dependencies
2014-12-26 13:56:26 +01:00
34180f1745
doc/user: add libicu-dev to Debian build dependencies
2014-12-26 13:54:33 +01:00
49968541fd
sticker/Match: add inequality operators
2014-12-12 22:26:04 +01:00
cc143105b8
sticker/Match: add operator "EQUALS"
...
Mapped to "=" in the MPD protocol. This is the first operator,
initially supporting value matches in the MPD protocol.
2014-12-12 22:16:00 +01:00
3400398230
doc/mpdconf.example: move sidplay documentation to the user manual
2014-12-04 21:06:21 +01:00
0debba0f6e
mixer/null: new mixer plugin
2014-12-02 18:20:44 +01:00
12b6959ea2
Playlist: reset song priority on playback
...
A priority should be a volatile thing: it should schedule a song for
playing back once, but it should not affect the next time the queue
gets played.
2014-11-26 08:54:16 +01:00
70b5a81a29
{Tag,Song}Print, PlayerCommands: report song duration with milliseconds precision
2014-11-25 17:46:43 +01:00
bf15cac980
Merge branch 'v0.19.x'
2014-11-24 09:00:14 +01:00
716225cd2f
doc/protocol: mention that "count" can have multiple filters
2014-11-24 08:09:58 +01:00
f37481f843
DatabaseCommands: add "window" parameter to "search"/"find"
2014-11-18 14:31:27 +01:00
2a716b7a7a
doc: document the mount/neighbor commands
2014-10-10 23:22:39 +02:00
63272541eb
doc/protocol: add more markup
2014-10-10 23:22:39 +02:00
5525ea45a4
Add MusicBrainz' Release Track Id tag
...
The Release Track Id uniquely identifies a recording on a release - that
is, even if a recording appears twice on a release (meaning that the
combination of recording and release id are not enough to figure out
which one it is), the release track id will allow differentiating the two.
The tag names are taken from
https://musicbrainz.org/doc/MusicBrainz_Picard/Tags/Mapping
2014-09-27 19:54:12 +02:00
7c444dea6e
doc/user: add section "Satellite setup"
2014-09-19 22:41:00 +02:00
6d91d270d6
doc/user: more NFS instructions
2014-09-19 22:12:49 +02:00
af384d9aa6
doc/user: require bit-perfect playback for DoP
2014-09-05 14:32:43 +02:00
68bdfa9d0e
doc/user: add sections for bit-perfect playback and DSD
2014-09-02 14:42:05 +02:00
97b816200d
doc/protocol: enable docbook-xslt option "use.id.as.filename"
2014-09-02 13:50:47 +02:00
059a643188
doc/user: enable docbook-xslt option "use.id.as.filename"
2014-09-02 13:44:38 +02:00
7facad41b7
doc/user: add links
2014-09-02 10:36:20 +02:00
3ee59e454c
doc/user: remove redundant encoder plugin settings
2014-09-02 10:36:20 +02:00
e5a28bfd8d
output/alsa, pcm: rename "DSD over USB" to "DoP"
...
The standard has been renamed since the early draft that was
implemented in MPD.
2014-08-31 16:12:26 +02:00
6e04d66a35
release v0.18.13
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=c2vC
-----END PGP SIGNATURE-----
Merge tag 'v0.18.13'
2014-08-31 15:03:34 +02:00
4efa96df21
doc/protocol: fix description of "stats" response
...
Fix incorrect description of the "songs" field and add missing
"albums" field.
Signed-off-by: Joachim Fasting <joachifm@fastmail.fm>
2014-08-31 13:16:39 +02:00
d5287682d1
ArgParser: allow fractional seconds in ParseCommandArg(SongTime)
2014-08-29 23:46:38 +02:00
e1e62d97a8
doc/mpd.conf.5: remove deprecated setting
2014-08-24 13:59:49 +02:00
a29cc48fec
doc/{mpd.conf.5,mpdconf.example}: move documentation to the manual
2014-08-24 13:33:00 +02:00
42af040fbd
StateFile: configurable interval
2014-08-24 13:24:20 +02:00
9d04c21cc2
doc/user: document the state file
2014-08-24 13:24:20 +02:00
ed8039e223
doc/user: add comments about libao and openal
2014-08-24 13:24:20 +02:00
f05743bf57
doc/user: add comment about Linux and OSS
2014-08-24 13:24:19 +02:00
c6be661bb5
doc/user: more markup
2014-08-24 13:24:19 +02:00
baad86bcd7
doc/user: document ALSA mixer plugin settings
2014-08-23 15:39:32 +02:00
5d2506e697
SongFilter: new filter "modified-since"
2014-08-11 22:38:58 +02:00
14908b7f28
doc/protocol: reformat the "find" types
2014-08-11 22:38:58 +02:00
2e122e1509
db/simple: compress the database file using gzip
2014-08-11 21:48:25 +02:00
751995ab95
QueueCommands: new command "rangeid"
...
Manipulates the playback range of a queued song.
2014-07-12 18:55:41 +02:00
681643ea9e
input/curl: options "verify_peer" and "verify_host"
2014-07-11 16:39:42 +02:00
0801b3f495
configure.ac: check for Boost
2014-06-11 09:27:17 +02:00
12768babdf
doc/protocol.xml: add warning to "listall" and "listallinfo"
2014-04-29 10:31:14 +02:00
bc2a1160b8
db/Count: implement grouping
2014-04-27 22:27:43 +02:00
ae178c77bd
DatabaseCommands: "list" allows grouping
2014-04-24 11:38:49 +02:00
cfbee59152
doc/protocol.xml: change "in" to "base"
2014-04-24 09:37:31 +02:00
b4db28fed2
doc/protocol.xml: update and fix command "list"
2014-04-24 08:20:38 +02:00
96afa8bd2b
command: add command "listfiles"
...
Lists files and directories. Supports storage plugins.
2014-03-01 06:25:57 +01:00
9e02b13ab3
systemd: add socket activation files
2014-02-12 21:22:36 +01:00
b3663b5da2
storage/nfs: new storage plugin
2014-02-08 14:24:47 +01:00
5fb54095d2
doc/user: document storage plugins
2014-02-08 00:09:53 +01:00
746a47982b
release v0.18.8
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Arwc
-----END PGP SIGNATURE-----
Merge tag 'release-0.18.8'
2014-02-07 00:17:36 +01:00
af66ed2505
doc/user: document the RoarAudio output plugin
2014-02-06 21:46:29 +01:00
e4322a716c
input/nfs: new plugin using libnfs
2014-02-06 18:37:27 +01:00
90886c0760
doc/user: sort input plugins
2014-02-06 18:37:27 +01:00
8a8d023f90
doc/user: add Debian build dependencies
2014-01-29 08:10:07 +01:00
67ad31b8b2
doc/developer: mention git pull requests
2014-01-27 10:44:27 +01:00
35f46eaa3f
doc/developer: update number of contributors
2014-01-27 10:44:22 +01:00
ccfb125f02
doc/developer: add mailman page
2014-01-27 10:44:05 +01:00
f29e3ce8d5
doc/developer: explain clang static analyzer
2014-01-27 10:36:48 +01:00
bcb4646d6b
doc/developer: tag for email address
2014-01-27 10:36:26 +01:00
30fadaed7f
Merge branch 'v0.18.x'
2014-01-27 10:33:42 +01:00
716bdc36fd
pcm/SoxrResampler: Add configurable quality levels
2014-01-21 20:35:26 +01:00
da67260c95
new developer mailing list
2014-01-20 17:20:57 +01:00
ea771c17c5
Shine encoding plugin
...
This encoding plugin features a fixed-point mp3 encoder,
with faster encoding on architectures without a FPU.
Right now the encoder is limited to stereo and 16 bit depth.
The bitrate and sample rate can be modified in audio_output.
audio_output {
type "httpd"
name "My shine stream"
encoder "shine"
port "8000"
format "44100:16:2"
bitrate "320" # default: 128
}
2014-01-13 11:14:19 +01:00
1583eb36e4
doc/user: mention the upnp database plugin
2014-01-09 20:59:51 +01:00
67a6a12916
doc/user.xml: add alsa input section
2014-01-08 23:02:21 +01:00
139122c57f
Merge branch 'v0.18.x'
2014-01-08 22:14:12 +01:00
3a05c421e0
doc/user: fix typo
2014-01-07 18:06:58 +01:00
c666794ce3
Added soundcloud documentation
2014-01-04 14:01:12 +01:00
809b0eb1f5
command: "lsinfo" and "readcomments" allowed for remote files
2013-12-29 18:25:32 +01:00
5465647c2e
input/smbclient: new input plugin
2013-12-29 01:25:27 +01:00
c7b1038a9d
Merge branch 'v0.18.x'
2013-12-14 12:37:16 +01:00
db4ae19246
doc/mpd.conf.5: remove redundant documentation
...
The real and detailed documentation is in the user manual.
2013-12-11 21:04:28 +01:00
82a89c6bfe
doc/user: document the "ao" output
...
Move from doc/mpd.conf.5.
2013-12-11 21:03:11 +01:00
166c70cab3
doc/user: document the "fifo" output
...
Move from doc/mpd.conf.5.
2013-12-11 20:58:06 +01:00
de78fe38c8
doc/user: document shout option "protocol"
2013-12-11 20:54:42 +01:00
2b717997e2
command: add commands "addtagid", "cleartagid"
2013-12-02 12:50:27 +01:00
3e11a28cd9
pcm/SoxrResampler: new resampler option using libsoxr
2013-12-01 19:13:39 +01:00
a698cc8112
doc: move documentation from mpd.conf.5 to the user manual
2013-12-01 19:13:39 +01:00
916aaacb68
doc/user: remove obsolete "24_3" option
2013-12-01 19:13:39 +01:00
bed98303a3
doc: audio_outputs sample output and explanation of each returned line
2013-11-22 10:18:17 +01:00
6f4202408c
doc/example: remove "format" and "audio_output_format"
...
Just an attempt to prevent users from shooting themselves in the foot
by uncommenting these lines without knowing what they're doing.
2013-11-11 17:18:29 +01:00
d125567f4a
doc/developer: add text from the wiki
2013-11-08 12:54:16 +01:00
e314844a4d
doc: show .tar.xz in sample unpack command
2013-11-08 12:29:04 +01:00
017bc564af
doc: replace the remaining wikia links
2013-11-08 12:26:07 +01:00
6219326e02
doc: more information about "close"
2013-11-07 18:41:53 +01:00
6c4de5106b
doc: remove documentation on obsolete tcp_keep_alive options
2013-11-07 18:39:55 +01:00
e936705840
doc: add link to user manual
2013-11-07 18:36:55 +01:00
9b2603b6f6
doc: update current maintainer
2013-11-07 18:34:57 +01:00
88856b847c
doc: update Mantis link
2013-11-07 18:34:04 +01:00
f679878f7b
doc/user: add more documentation for the proxy database plugin
2013-11-07 18:31:56 +01:00
f33acf8758
input/cdio_paranoia: add setting "default_byte_order"
...
Allows big-endian users to configure the fallback byte order to
little-endian. Without this setting, MPD assumes native byte order if
the CD drive can't decide.
2013-11-07 18:17:54 +01:00
54abeab80b
increase default buffer size to 4 MB
...
2 MB was too small for cross-fading a 24 bit file. Increasing to 4 MB
is still not too large for weak machines, but is enough for
cross-fading.
2013-10-30 21:46:40 +01:00
2aee1b86f3
SongFilter: add special keyword "base"
...
Restores the features from the previous draft commands "findin" /
"searchin".
2013-10-29 21:13:40 +01:00
b5fc21b9f4
Revert "command: new commands "findin", "searchin" with base URI"
...
This reverts commit a577944ab5
2013-10-29 21:13:40 +01:00
a577944ab5
command: new commands "findin", "searchin" with base URI
2013-10-26 16:13:35 +02:00
17dc638c18
command: new command "readcomments" lists arbitrary file tags
2013-10-25 19:35:40 +02:00
961c7d0f78
OtherCommands: re-add the "volume" command
...
This command was removed by commit 206392ad
2013-10-25 00:20:36 +02:00
6a42e6f6d4
doc/developer: require C++11
2013-10-20 13:03:32 +02:00
db44a6e948
decoder/modplug: Add "loop_count" parameter
...
The "loop_count" configuration parameter allows the user to set how
many times a module with backward loops shall loop. "0" (the default)
means a module is not allowed to use backward loops at all. "-1"
enables inifinite looping.
2013-10-19 16:12:17 +02:00
b6ac249c3c
decoder/mikmod: Add loop configuration parameter
...
This patch allows the user to configure the mikmod decoder plugin to loop
modules. It adds a configuration parameter to the mikmod decoder called
"loop" which can be "no" (the old behaviour, default) or "yes" to allow
modules to use backward loops.
2013-10-18 14:23:24 +02:00
060814daa8
Log: new logging library API
...
Prepare to migrate away from GLib. Currently, we're still using GLib
as a backend.
2013-10-02 08:57:55 +02:00
a446775d80
playlist/lastfm: remove defunct Last.fm support
...
This plugin has been defunct ever since Last.fm changed their
protocol. Since there is no volunteer willing to fix the plugin, I'm
removing it now.
2013-09-28 14:01:51 +02:00
08e6d222a2
Listen: Allow tilde paths for socket.
2013-09-12 08:55:45 +02:00
87b7328463
CommandLine.cxx: look for config file in XDG_CONFIG_HOME too
...
Look for "$XDG_CONFIG_HOME/mpd/mpd.conf", similar to where mpd looks
for the file under Windows.
2013-08-07 18:22:27 +02:00
85b77b81ca
*: use gcc.h macros instead of GLib
2013-08-04 23:48:01 +02:00
9e715089a4
Commands: new command "toggleoutput"
2013-08-04 23:21:23 +02:00
9326ce53ec
Merge tag 'release-0.17.5'
2013-08-04 14:36:22 +02:00
2df2a989af
input/soup: plugin removed
...
This plugin is cumbersome to support, now that MPD is migrating away
from GLib and the GLib event loop. It has no practical advantages
over the CURL plugin. Soup requires the bloated GType library.
2013-04-17 21:46:16 +02:00
e903d00968
output/ffado: remove broken plugin
...
This plugin has been in MPD for three years, and it has never worked.
Enough!
2013-04-17 00:44:02 +02:00
cc6c452854
output/mvp: remove obsolete plugin
...
The hardware is obsolete, and the product does not exist anymore on
the Hauppauge web site. Let's see if anybody complains about the
removal.
2013-04-17 00:37:30 +02:00
5dd728d802
doc: move sticker_file to "optional parameters"
2013-04-16 23:19:44 +02:00
ce7c97b6ba
doc: mpd.conf.5 wrongly documents parameters as required
...
mpd.conf.5 lists follow_outside_symlinks and follow_inside_symlinks
under REQUIRED, yet also documents a default value for these options,
which only makes sense if they're not actually required.
2013-04-16 23:17:43 +02:00
8017301de5
Merge branch 'v0.17.x'
2013-02-27 20:00:14 +01:00
46528783ef
fix typos in upstream's mpd.conf.5
2013-02-27 19:50:05 +01:00
74500eacca
Merge branch 'v0.17.x'
2013-01-16 20:05:26 +01:00
5def2a09bd
mpdconf.example: example improvements
...
- Add mandatory "name" setting for winmm/openal examples.
- Fix the language in openal sample (a -> an)
2013-01-11 15:28:21 +06:00
7801ca86b9
mpdconf.example: provide an example of openal output
2013-01-10 15:50:00 +06:00
10fc288c91
mpdconf.example: provide an example of winmm output
2013-01-10 15:46:30 +06:00
43806d524d
mpdconf.example: improve documentation for replay gain
...
- Added replaygain_missing_preamp and replaygain_limit settings
- Added information about "auto" replay gain mode
2013-01-10 15:34:25 +06:00
9cdbde4f5e
output: new option "tags" may be used to disable sending tags
...
Implements Mantis ticket 0003340.
2012-09-25 23:31:07 +02:00
2a4c799471
Merge branch 'v0.17.x'
2012-09-04 11:28:13 +02:00
2050e2f886
mpd.conf(5): Use the correct default value for max_playlist_length
2012-09-03 22:49:51 +02:00
efccb6ac82
Merge branch 'v0.17.x'
2012-08-15 01:04:34 +02:00
93f9c2ab6b
doc/user: add wildmidi documentation
2012-08-15 01:03:16 +02:00
4a993cd79e
decoder/fluidsynth: add "sample_rate" setting
2012-08-15 00:57:32 +02:00
02325d2ede
decoder/fluidsynth: add "soundfont" setting
...
Replaces the old global "soundfont" which never worked.
2012-08-15 00:51:45 +02:00
7d27d2ea5e
Merge branch 'v0.17.x'
2012-08-14 23:58:54 +02:00
49c7102547
mpd.conf(5): Document the existence of musicbrainz_ tags
...
Additionally, update mpdconf.example to refer to mpd.conf(5) for the
complete list of tags instead of trying to repeat it.
2012-08-14 09:43:18 +02:00
ca9795c30a
conf: add a "database" block
...
The new block overrides the "db_file" setting, and allows configuring
any database plugin.
2012-08-08 09:28:13 +02:00
0555e2c781
Fix typo
2012-07-08 09:19:12 +02:00
7235dbadfd
patch to split DSD decoder into separate decoders for DSF en DFF. Move common
...
functions to new dsdlib. Update user doc.
2012-06-27 09:54:24 +02:00
ecec41025f
Documentation for commands searchadd, searchaddpl, and for tcp keepalive config options
2012-06-27 09:50:35 +02:00
3c3f1b7ff2
Add support for DSF files to DSDIFF decoder - v4
...
Version 4 of my patch to add DSF support to the DSDIFF
decoder plugin.
This time I have taken a different approach and created a new
read_metadata function specific for reading DSF files. This saves an
indent (and for me a lot of indent nightmares) and also useful for
splitting the DSF and DFF decoders later on.
There are still a few lines which exceed the 80 character width limit by
a few chars. I was not able to stay within the limit and create (for me)
readable code.
Jurgen
2012-05-02 08:47:02 +02:00
f930f37d35
Add support for DSD-over-USB version 1.0, remove pre-v1 support
2012-04-04 20:13:15 +02:00
167242fec0
output/alsa: add option to enable DSD over USB
2012-03-22 01:30:16 +01:00
351ac4a2c0
command: read arbitrary local files with "lsinfo"
...
Requires UNIX domain socket connection.
2012-03-06 22:23:10 +01:00
fa39bb0a50
doc/protocol: fix some grammar
...
(Maybe it should be "A new message is indicated...", I don't know.)
( ^^ )
2012-02-15 21:17:19 +01:00
7338b16c18
listen: implement systemd socket activation
2012-02-13 21:32:42 +01:00
5540fbaec2
command: new command "config"
2012-02-13 20:30:27 +01:00
1735284a2a
playlist/embcue: new plugin for reading embedded cue sheets
...
Parses CUE data from the "CUESHEET" tag. Needs further integration in
the update thread.
2012-02-12 16:10:20 +01:00
b9673fc521
command: add optional range parameter to "load"
2012-02-09 23:55:34 +01:00
99949c8f6f
command: new command "seekcur"
...
For simpler seeking within current song.
2011-12-24 11:20:02 +01:00
545685bc32
audio_format: basic support for floating point samples
...
Support for conversion from float to 16, 24 and 32 bit integer
samples.
2011-10-20 02:32:39 +02:00
6d0601b99f
doc/protocol.xml: the replay gain "auto" mode was added in MPD 0.16
2011-10-19 23:59:44 +02:00
b6e713711d
doc/protocol.xml: document {en,dis}ableoutput's parameter
2011-10-19 23:32:19 +02:00
8e1e36a0d5
doc/doxygen.conf: enable "quiet" mode
2011-10-10 10:13:43 +02:00
894b9cfdb9
decoder/dsdiff: add option "lsbitfirst"
...
Defaults to "no", which fixes the noise problems.
2011-10-07 10:10:43 +02:00
7ecbb0454f
decoder/dsdiff: add documentation
2011-10-07 06:38:23 +02:00
a3f7947ad2
server_socket: use resolve_host_port() instead of getaddrinfo()
...
Allow port specification in "bind_to_address" settings.
2011-09-20 21:15:22 +02:00
6a3008d7ff
Merge branch 'v0.16.x'
...
Conflicts:
configure.ac
src/output_control.c
2011-09-01 19:19:42 +02:00
4428894aba
let doxygen find the source code
...
[Unfortunately,] @top_srcdir@ is replaced by the package's top-level
directory relative to the directory of the .in file being processed,
e.g. if you unpack the MPD source to /usr/src/mpd, and build it in the
same directory, @top_srcdir@/src/ in doc/doxygen.conf.in will be re-
placed by "../src/", and, as doxygen is invoked from the top directory,
is will expect the source code in /usr/src/src/, which is obviously
wrong.
To work around this problem, this patch changes @top_srcdir@ to
@abs_top_srcdir@, which expands to the absolute path of the top source
directory[1].
[1] http://www.gnu.org/s/hello/manual/autoconf/Preset-Output-Variables.html
2011-08-27 11:30:30 +02:00
3d12d7de62
doc/developer.xml: change the coing style example return type to int
2011-08-27 11:27:32 +02:00
3b9ffea36f
input/soup: new input plugin based on libsoup
...
To demonstrate the new I/O thread. libsoup is well-integrated into
the GLib main loop, which made this plugin pretty easy to write.
As a side effect, we have to initialize the I/O thread in all debug
programs that use the input API.
2011-08-24 03:33:49 +02:00
b159bc0c5f
queue: implement song "priorities"
...
Sorts remaining songs by priority. This can be used for the
much-demanded "queue feature".
2011-07-19 00:34:33 +02:00
eb2f413cf0
Merge branch 'v0.16.x'
...
Conflicts:
NEWS
configure.ac
2011-07-19 00:24:20 +02:00
3680a6bbbb
doc/protocol: add some missing specifications
2011-07-03 15:05:04 +02:00
52b8e0f9ec
doc/user: Typo in playlist plugin documentation, 'playlist plugin' not 'filter'.
...
This patch fixes a typo in doc/user about playlist plugins.
Its in the top commit in my repository in a branch called 'doc_fix':
git://github.com/mcfiredrill/mpd.git
2011-07-03 14:53:37 +02:00
99640171e2
doc: Add despotify user documentation
2011-04-12 07:27:59 +02:00
6d3ed3f16f
fix common misspellings
...
These fixes were mostly generated with `codespell' [0] and manually
reviewed.
[0] http://git.profusion.mobi/cgit.cgi/lucas/codespell/
2011-03-31 21:46:01 +02:00
c3b425d570
doc: Add configuration help for despotify
2011-03-29 17:01:16 +02:00
2fb40fe728
playlist_state: add option "restore_paused"
...
When set, MPD will not auto-start playback on startup; it will be in
"paused" state.
2011-02-23 09:10:23 +01:00
144d092637
output/shout: add possibility to set url
...
Added a new optional parameter for the shout plugin called "url".
2011-02-09 22:42:51 +01:00
f8b09c194f
protocol: support client-to-client communication
2011-01-29 10:43:54 +01:00
24d51b9d14
doc: add a list of encoder plugins
2011-01-10 23:13:01 +01:00
a800afcbf8
docs: mention 'sticker' idle event
2011-01-05 13:03:17 +01:00
b8fe2c74bc
Makefile.am: generate doxygen.conf
...
Don't create a modified copy for out-of-tree builds.
2010-12-24 00:25:31 +01:00
9bf7fde49f
configure.ac: hook the cdio_paranoia input plugin
2010-12-22 09:44:02 +01:00
75f4772ba2
output: new output plugin "ffado"
...
Using libffado, to play on firewire audio devices.
Warning: this plugin was not tested successfully. I just couldn't
keep libffado2 from crashing. Use at your own risk.
For details, see my Debian bug reports:
http://bugs.debian.org/601657
http://bugs.debian.org/601659
2010-10-27 21:25:41 +02:00
9af9fd1400
output/httpd: bind_to_address support (including IPv6)
...
Added support for a new optional configuration setting for the httpd output
named "bind_to_address". Setting it to a specific IP address (v4 or v6) will
cause the httpd output to bind to that address exclusively. Supporting
multiple addresses in parallel is future work.
This implements the feature requests #2998 and #2646 .
2010-09-25 15:00:43 +02:00
bc87ec0059
doc/protocol: update descriptions of the searching commands
2010-08-31 06:56:54 +02:00
92b6ba9eff
doc/protocol: mention that 'status' command also returns 'random'
2010-08-15 11:35:21 +02:00
12f4225d6b
Makefile.am: fix out-of-tree doxygen call
...
This hack creates a copy of doc/doxygen.conf with the INPUT setting
replaced.
2010-07-25 14:02:10 +02:00
92e66e5ab2
replay_gain: added mode "auto"
2010-04-25 13:51:58 +02:00
393bcd961a
inotify: added setting "auto_update_depth"
...
Limits the depth of the watched directories. This is useful to keep
resource usage down and speed up MPD startup.
2010-04-13 21:31:57 +02:00
e7a515c8b1
Add support for MixRamp tags
...
Adds mixrampdb and mixrampdelay commands. Reads MIXRAP_START and
MIXRAMP_END tags from FLAC files and overlaps instead of crossfading.
2010-03-21 18:21:47 +01:00
e686d19154
output: added option "always_on" for radio stations
...
Did you ever accidently click "stop" while feeding a radio station?
This option sets the output device to "pause" to disable the "close"
method. It falls back to "pause" then, which is specific to the
plugin. Some plugins implement it by feeding silence.
2010-03-10 19:49:31 +01:00
96493e0333
replay_gain: optionally use hardware mixer to apply replay gain
...
Add an option for each audio output which enables the use of the
hardware mixer, instead of the software volume code.
This is hardware specific, and assumes linear volume control. This is
not the case for hardware mixers which were tested, making this patch
somewhat useless, but we will use it to experiment with the settings,
to find a good solution.
2010-02-17 08:14:07 +01:00
32441175f4
doc: deleted sticker specification proposal
...
This document has been unmaintained for more than a year now (since
the day it was submitted).
2010-02-08 11:39:16 +01:00
059d1dc7f2
command: "listplaylist" dumps playlist files
...
Same for "listplaylistinfo".
2010-02-08 11:11:43 +01:00
1abfcc56af
audio_format: support packed 24 bit samples
2010-01-16 23:44:54 +01:00
1648c7aa5b
decoder/mikmod: sample rate is configurable
...
The new option "sample_rate" sets the sample rate for libmikmod.
2009-11-14 02:24:42 +01:00
a6fd5819f9
doc: added decoder plugin reference
2009-11-14 02:06:23 +01:00
375fd5ed4c
output/jack: added option "server_name"
2009-11-07 17:26:21 +01:00
2f1bd39be8
command: added command "decoders"
...
This command prints a list of decoder plugins and their suffixes /
MIME types.
2009-11-07 15:57:22 +01:00
ba34d48cf0
output/jack: dynamic source port list
...
Same as the previous patch: create up to 16 configured source ports.
The plugin tries to do its best at guessing the right combination for
the given input file, the number of source and destination ports.
2009-11-06 18:58:35 +01:00
fac6e9ecdb
output/jack: renamed option "ports" to "destination_ports"
...
Be more clear which kind of port should be configured here.
2009-11-06 01:54:58 +01:00
dbbead6e72
output/jack: renamed "output ports" to "destination ports"
...
Use the same name as in the libjack API documentation.
2009-11-06 01:35:19 +01:00
f3203b5de5
playlist: added extm3u plugin
...
This new plugin parses extm3u files. Files without the "#EXTM3U"
header are still parsed by the plain old "m3u" plugin.
2009-11-06 00:41:42 +01:00
2a9685cb3a
output/jack: use jack_client_open() instead of jack_client_new()
...
jack_client_new() is deprecated. This requires libjack 0.100
(released nearly 5 years ago). We havn't been testing older libjack
versions anyway.
As a side effect, there is the new option "autostart".
2009-11-05 20:01:18 +01:00
9449006ac3
doc/user: document JACK plugin options
2009-11-05 19:55:16 +01:00
88abfc0d0f
output/jack: added option "client_name"
...
Instead of using MPD's audio output name (setting "name"), use a
separate configuration option. Change the default to "Music Player
Daemon".
2009-11-05 19:55:00 +01:00
5744634094
sticker comments in code and example configuration file
...
Signed-off-by: Romain Bignon <romain@peerfuse.org>
2009-11-04 00:21:58 +01:00
8bfe3497b0
replay_gain: trigger OPTIONS idle event on mode change
2009-11-01 15:44:56 +01:00
bb5acc939f
httpd: add config option to limit number of clients
2009-10-29 22:38:18 +01:00
f67426871b
mpd.conf: new bool config value for enabling/disabling inotify update
2009-10-26 19:14:40 +01:00
9526fdbe73
audio_format: wildcards allowed in audio_format configuration
...
An asterisk means that this attribute should not be enforced, and
stays whatever it used to be. This way, some configuration values
work like masks.
2009-10-21 23:01:04 +02:00
d69e0ab53a
command: omitting the range end is possible
...
When the range end is missing, then the maximum possible value is
assumed.
2009-10-18 01:24:49 +02:00
6a5e7c118b
doc/protocol.xml: documented range parameter in "delete"
2009-10-18 01:24:22 +02:00
bddb6b4273
command: allow changing replay gain mode on-the-fly
...
The new command "replay_gain_mode" allows the user to switch the
replay gain mode on-the-fly. No more mpd.conf editing.
2009-10-17 22:58:19 +02:00
8d217567c6
replay_gain: added setting "replaygain off"
...
There was no setting for disabling replay gain. It was off when the
"replaygain" setting was not there.
2009-10-17 21:38:45 +02:00
5554633ab8
update: obey .mpdignore files
2009-10-16 18:11:43 +02:00
8cd845b79e
doc/user.xml: added chapter "Using MPD"
2009-10-16 18:10:36 +02:00
06da91a73b
doc/user.xml: added playlist plugin reference
2009-10-16 17:51:33 +02:00
cb331ae436
playlist_list: pass configuration to playlist plugins
...
This patch completes the configuration support.
2009-10-13 16:19:21 +02:00
57f69a2915
doc/protocol.xml: "addid" with negative position is deprecated
2009-10-09 10:18:02 +02:00
1039d57251
Add the sidplay filter param to doc/mpdconf.example.
2009-09-28 11:59:55 +02:00
89ba540e6d
command: added command "rescan"
...
"rescan" is the same as "update", but it discards existing songs in
the database.
2009-09-24 21:55:40 +02:00
a86f9b8035
cmdline: removed options --create-db and --no-create-db
...
Both options are deprecated, and should not be used anymore. Many
users get confused by their presence.
2009-09-20 23:31:35 +02:00
fdc479676f
Merge branch 'v0.15.x'
...
Conflicts:
NEWS
configure.ac
doc/mpdconf.example
2009-09-10 23:18:43 +02:00
985b8b2d71
doc/protocol: clarify "update"
...
The update job id is positive. When used in a command list, MPD
prints one job id for each "update" command.
2009-09-10 23:12:38 +02:00
c97bccad01
doc/mpdconf.example: additional comment signs for some parameters
...
Add a second column of comment signs on some parameters which users
shouldn't usually set, unless they know what they're doing.
2009-09-10 23:10:23 +02:00
f5f4a9da6b
doc: documented the "openal" output plugin settings
2009-09-06 22:22:17 +02:00
129920e8f4
Merge branch 'master' of git://git.musicpd.org/avuton/mpd
2009-09-02 12:51:44 +02:00
dc3b96a003
doc: Unify position of footnotes and cleanup wording.
2009-08-30 18:57:12 -07:00
5a0d77bea3
doc: Remove superfluous comment already described in footnotes.
2009-08-30 18:53:14 -07:00
cde9408bd8
decoder/sidplay: implemented songlength database
...
[mk: added autoconf test; fixed songlen_data_size type]
2009-08-30 19:49:04 +02:00
f2ff2409ad
Merged release 0.15.3 from branch 'v0.15.x'
...
Conflicts:
NEWS
configure.ac
2009-08-30 09:42:12 +02:00
df0c26a394
command: add "findadd" command.
2009-08-25 13:43:22 +02:00
edb2fce616
Document nextsong and nextsongid.
2009-08-24 22:19:05 +02:00
4a0d4a02a6
output/recorder: new output plugin for recording radio streams
...
The recorder plugin writes audio played by MPD to a file. This may be
useful for recording radio streams.
This implementation is incomplete, because support for tags is
missing, and MPD should be able to record each track to a different
file.
2009-08-24 18:57:06 +02:00
0c66832b3b
doc: removed deprecated mixer options from manpage
...
Removed documentation about the global options mixer_type,
mixer_device and mixer_control.
2009-07-28 17:22:55 +02:00
d718a8b59d
daemon: added "group" configuration option
...
The "group" configuration option is similar to "user" as it
sets user set what group MPD shall run as. With "user"
option, MPD changed GID to the GID of the user, however,
more control could be desired.
Moreover, the patch changes the way of checking whether no
setuid(2)/setgid(2) is required -- previously user names
were compered, now UID and GIDs are compered (ie. the one we
already have (getuid(2)/getgid(2)) with the one we want to
change to).
2009-07-19 08:17:55 +02:00
4100035b19
Merged release 0.15.1 from branch 'v0.15.x'
2009-07-16 07:37:13 +02:00
7261739526
cmdline: renamed option "--stdout" to "--stderr"
...
Since version 0.14, MPD has been logging to standard error instead of
standard output. The option name should reflect that. The old option
continues to work, we will remove it in a future MPD release.
2009-07-15 18:27:32 +02:00
ce517ad5d8
doc: documented the "shout" output plugin settings
2009-07-06 22:25:28 +02:00
0e383fbec2
doc: documented the "pulse" output plugin settings
2009-07-06 22:17:27 +02:00
47cf647ef6
doc: documented the "command" setting of the "pipe" output plugin
2009-07-06 22:15:36 +02:00
0275690b5c
output: use the software mixer plugin
...
Do all the software volume stuff inside each output thread, not in the
player thread. This allows one software mixer per output device, and
also allows the user to configure the mixer type (hardware or
software) for each audio output.
This moves the global "mixer_type" setting into the "audio_output"
section, deprecating the "mixer_enabled" flag.
2009-07-06 22:00:50 +02:00
206392ad1a
command: removed the "volume" command
...
This command has been deprecated more than 5 years ago (0.10.0). Its
implementation is a kludge, let's remove it now.
2009-07-06 21:51:00 +02:00
d4914fc9ef
idle: added "update" event
...
Some clients have visual feedback for "database update is running".
Using the "database" idle event is unreliable, because it is only
emitted when the database was actually modified. This patch adds the
"update" event, which is emitted when the update is started, and again
when the update is finished, disregarding whether it has been
modified.
2009-07-05 08:46:53 +02:00
644fc48776
conf: registered option "filter"
...
Add this option to the user's manual.
2009-07-05 06:54:45 +02:00
5b9dfbe353
doc/user: added introduction
...
- introduce a section explaining the mpd.conf format, as done in the man page:
is it better to re-explain it here or ointing the user to the man page,
avoiding information dupplication?
- reorganizze some sections of the manual to give them a linear aspect...
2009-06-30 07:31:09 +02:00
746e95a0a6
doc/protocol: clarified "idle database"
2009-06-30 07:28:34 +02:00
84c2e84570
doc: fix wording for option "follow_inside_symlinks"
2009-06-26 14:41:07 +02:00
ce072b89d2
command: added new "status" line with more precise "elapsed time"
2009-06-25 08:37:34 +02:00
5372ee406a
doc: refer to command_list_ok_begin, not command_list_begin
...
list_OK is returned only after command_list_ok_begin.
2009-06-09 09:19:42 +02:00
08732ce189
doc: fixed a typo in the protocol documentation
2009-06-09 09:17:22 +02:00
5c5d39b012
doc: mark the "User's Manual" as incomplete
2009-06-02 21:09:46 +02:00
3483c891dc
doc: added Developer's Manual
...
Just a start...
2009-06-02 21:09:45 +02:00
516e52c67b
doc: added "since MPD version" to commands
...
Document which commands were introduced after MPD 0.13.
2009-06-02 20:47:00 +02:00
1d0be2a031
doc: fixed DocBook markup in doc/sticker.xml
...
The old sticker.xml used elements which are not valid in DocBook. Now
that the file is valid, let's add it to $(DOCBOOK_FILES).
2009-05-15 18:54:50 +02:00
e710037760
output_init: added option to disable the hardware mixer
...
Added the per-device option "mixer_enabled" which allows users to
disable the hardware mixer of an audio output.
2009-04-28 20:33:06 +02:00
61b0835512
command: added "sticker delete" command
2009-04-28 20:25:07 +02:00
fd09a3cf1f
clean up documentation of mixer options.
2009-04-28 17:21:26 +02:00
05dfdfdb39
alsa_mixer: add mixer_index option
...
This allows you to select controls with duplicate names.
2009-04-28 09:15:48 +02:00
11bcd7f013
curl: moved proxy settings to "input" block
...
The old global settings "http_proxy_host", "http_proxy_port",
"http_proxy_user" and "http_proxy_password" continue to work.
2009-04-25 13:35:04 +02:00
bd014483c2
doc: added input plugin documentation
2009-04-25 13:22:09 +02:00
8b5d6d17ff
doc: added decoder documentation
2009-04-25 13:21:45 +02:00
de95caa346
doc: added more audio output documentation
2009-04-25 13:21:36 +02:00
57cf984aae
doc: added "music directory" section
2009-04-10 09:13:59 +02:00
539e96bfcc
doc: xml typo fix
...
A <varlistentry> was accidentally added before the
beginning of the intended <variablelist>
2009-04-06 21:22:46 -05:00
e720b5bdf8
command: added command "sticker find"
...
This command allows clients to search for stickers with a specified
name.
2009-04-01 18:53:02 +02:00
1f4f6e6df2
exconf: Fix spacing
2009-03-30 19:21:42 +02:00
e81f683a18
implemented the 'consume' mode
...
Consume mode removes each song played
2009-03-30 17:37:55 +02:00
bfc25cfd3b
exconf: update mixer documentation.
2009-03-29 21:40:08 +02:00
12b6ca8832
exconf: The usual defaults updates.
...
Ths usual defaults updates, this includes clarifications, cleanups, updates
and fixes.
2009-03-29 21:40:08 +02:00
b964480767
exconf: Comment formerly required files.
2009-03-29 21:40:08 +02:00
3836dcf59b
exconf: Merge required files with optional.
2009-03-29 21:40:01 +02:00
e7519829ac
renamed smartstop to single and changed behavior
...
When single mode is enabled, after current song it stops playback,
or it replay same song if repeat mode is activated.
2009-03-27 15:28:49 +01:00
e46722b2eb
implements the smartstop feature
...
The smartstop feature is a way to tell mpd to stop playing after
current song.
This patche provides:
- 'state' command returns 'smartstop' state (1 or 0)
- 'smartstop' can activate or not the smartstop state
- when song is terminated, mpd stops playing and smartstop is set to 0
2009-03-27 14:58:31 +01:00
13208bf5a7
queue/playlist/command: move range
...
The move command now accepts a range for the first argument, in the same
form as other range commands, e.g. move 15:17 3. The first song in the
range is placed at the destination position. Note that as with other
range commands, the range is inclusive on the left only; this example
would move only songs 15 and 16, not 17.
[mk: fixed signed/unsigned warnings; use G_MAXUINT instead of
UINT_MAX]
2009-03-26 22:02:56 +01:00
7684c446c6
doc: updated ranged playlist commands
...
Clearly specified the format (song1:song2) for range argumentst, and
added the range capability of the playlistinfo command.
2009-03-26 14:57:17 -05:00
272a7d081b
doc: Fixed moveid description
...
moveid uses an index, not a songid, for its second argument
2009-03-26 14:57:17 -05:00
3980245d1d
httpd: correct the encoder name in the example mpd.conf
...
It's called "vorbis", not "ogg".
2009-03-17 06:51:31 +01:00
bba127a392
solaris: new audio output plugin for Solaris /dev/audio
2009-03-16 09:55:10 +01:00
e62580db0b
httpd: new output plugin to replace "shout"
...
Let's get rid of the "shout" plugin, and the awfully complicated
icecast daemon setup! MPD can do better if it's doing the HTTP server
stuff on its own. This new plugin has several advantages:
- easier to set up - only one daemon, no password settings, no mount
settings
- MPD controls the encoder and thus already knows the packet
boundaries - icecast has to parse them
- MPD doesn't bother to encode data while nobody is listening
This implementation is very experimental (no header parsing, ignores
request URI, no icy-metadata, ...). It should be able to suport
several encoders in parallel in the future (with different bit rates,
different codec, ...), to make MPD the perfect streaming server. Once
MPD gets multi-player support, we can even mount several different
radio stations on one server.
2009-03-15 03:32:34 +01:00
24bc277b69
doc: added "audio outputs" section to the user's manual
2009-03-14 16:01:56 +01:00
e12140cfce
pcm_resample: choose the fallback resampler at runtime
...
Even if libsamplerate support is enabled, compile the fallback
resampler. When the user specifies the option
"samplerate_converter=internal", it is chosen in favor of
libsamplerate. This may help users with a weak FPU who don't want to
compile a custom MPD from source, because the fallback resampler does
not use floating point operations.
2009-03-14 15:26:36 +01:00
869f440f87
doc: added installation manual to the User's Manual
...
Very small start..
2009-03-12 17:12:53 +01:00
0cb8e7f2cb
doc: added skeleton for the user manual
2009-03-12 17:06:48 +01:00
b8ebb748c9
Add sticker list command.
...
[mk: merged memory leak patch; fixed indentation (tabs); fixed
documentation typo]
2009-03-03 07:49:23 +01:00
cabbf7ab4a
pipe: new audio output plugin which runs a command
...
[mk: adapted to new output plugin API]
2009-02-28 16:11:59 +01:00
90ee488597
mixer: Add "disabled" mixer_type.
2009-02-26 09:13:07 -08:00
3b1a9aeca0
Makefile.am: no recursive makefiles
...
Recursive Makefiles are inefficient and error prone (no proper way to
declare dependencies). Since there's no disadvantage in having one
single Makefile, let's do it.
2009-02-23 10:04:51 +01:00
9fe459f625
added the shufflerange command
...
This command shuffles a range of songs.
2009-02-13 10:43:30 +01:00
beaf860a17
doc: use $(DESTDIR)
...
Forgot the $(DESTDIR) prefix in the install-data-local target.
2009-02-13 09:50:42 +01:00
ef64449cb6
doc: generate API documentation with doxygen
...
When configured with --enable-documentation, use doxygen.
2009-02-13 09:11:22 +01:00
cd98a72ca6
configure.ac: make DocBook processing optional
...
Disable the HTML documentation generator by default. Most users will
pick it from the web site.
2009-02-04 15:25:57 +01:00
3f2ed33f57
changed sticker names to be lowercase and without spaces
2009-01-26 08:12:10 +01:00
7960ad32fc
doc: chunk the DocBook HTML output
...
Create a HTML chunk of each DocBook chapter. Use the UTF-8 character
set instead of docbook-xsl's ISO-Latin-1 default.
2009-01-25 18:24:42 +01:00
dc7d70ee26
sticker: added guidelines for sticker names
2009-01-19 19:13:55 +01:00
f9c693e602
command: added "sticker" command
...
The "sticker" command allows clients to query or manipulate the
sticker database. This patch implements the sub-commands "get" and
"set"; more will follow soon (enumeration), as well as extended
"lsinfo" / "playlistinfo" versions.
2009-01-19 19:09:49 +01:00
145ab84d51
sticker: new library for storing dynamic information about songs
...
"Stickers" are pieces of information attached to existing MPD objects
(e.g. song files, directories, albums). Clients can create arbitrary
name/value pairs. MPD itself does not assume any special meaning in
them.
2009-01-19 18:51:57 +01:00
1f0dfb4407
mapper: make the music_directory optional
...
Without a music_directory, MPD is an excellent streaming client.
2009-01-18 16:56:07 +01:00
9933144de7
mapper: make the playlist directory optional
2009-01-18 16:15:45 +01:00
ae5517b0b3
allow ~/.mpd/mpd.conf as alternate config file
...
mpd uses some additional files to work, such as pid_file, state_file,
db_file, etc. when running mpd as non-root user, it is often that those
files end in ~/.mpd
in that case, we end up with 2 entries in a user's home, .mpdconf and
.mpd - which clutters homedirs.
this patch allows ~/.mpd/mpd.conf as an alternative to ~/.mpdconf,
allowing for a cleaner homedir
2009-01-14 14:31:55 +01:00
e4a53df7db
don't exit after --create-db
...
Start the daemon after --create-db. This makes --create-db a flag
which discards the old database and starts with a fresh one.
2009-01-04 20:31:23 +01:00
ecb20c5f7e
mixer: renamed mix_* options to mixer_*
...
There is no reason to use the shortcut "mix" instead of "mixer".
2009-01-01 18:36:47 +01:00
9a70c4d06d
Moving mixers to audio outputs
2008-12-31 16:46:41 +01:00
c01aa53e6a
log: support syslog()
...
Allow logging to syslog if log_file is configured to "syslog".
2008-12-28 19:48:53 +01:00
8dc92ad284
log: deprecated "error_file" option
...
Removed the "error_file" option. There is only one log file now. If
a user wants to see only the errors, he should configure a log_level.
2008-12-28 19:48:52 +01:00
fbc573d03a
Fix a few problems with the huge mpdconf update. There's alot of shift here, mostly due to word wraps. This, also, improves on uniformity and clarity of the document.
2008-12-24 15:02:01 -08:00
1b5dd452d1
doc: fix "playlistdelete" documentation
...
"playlistdelete" takes a song position, not a song id. There are
no song ids in stored playlists.
2008-12-24 23:54:09 +01:00
3b2a752d0e
Merge branch 'http_buffer_remove' of git://git.musicpd.org/avuton/mpd
2008-12-21 19:40:06 +01:00
bc31d7a0ee
Merge branch 'master' of git://git.musicpd.org/avuton/mpd
...
Conflicts:
doc/mpdconf.example
2008-12-21 19:39:08 +01:00
e75e40085f
Remove obsolete http_buffer* stuff that went away with the new curl backend.
2008-12-20 22:16:02 -08:00
04561b604b
Huge mpdconf update.
...
Over time mpdconf has evolved and has been maintained and contributed to by many different folks at different
times. Try to give it some unity. Attempt to clear up some language and make things crystal clear. Add more
examples. Use tabs when it makes sense. Make better borders. Remove obsolete options. Try to put more defaults
when it makes sense.
2008-12-20 22:09:06 -08:00
a6e981c08d
doc: clarify "user" setting (starting as root / unprivileged)
...
The "user" option does not work if MPD is started by an unprivileged
user.
2008-12-20 17:37:12 +01:00
f5bbb2b819
man: document Unix domain socket configuration in the manual
...
Additionally, add an example in mpdconf.example.
2008-12-16 21:31:52 +01:00
a25b8acd82
update: default to follow all symlinks
...
MPD 0.13 and older followed all symbolic links. Although this can be
a security problem (as it has always been), 0.14 should offer the same
default behaviour as 0.13.
2008-12-08 10:01:20 +01:00
5b089f85fd
update: added options which control symlink behaviour
...
The configuration options "follow_outside_symlinks" and
"follow_inside_symlinks" let the user control whether MPD should
follow symbolic links in the music directory.
[mk: converted variables to "bool"; moved configuration to
update_global_init()]
2008-11-28 10:57:39 +01:00
a27a063691
command: added documentation for idle subscriptions
2008-11-23 18:48:11 +01:00
fa7a2f0ccc
Makefile.am: include protocol.xml in source tarball
...
Added $(DOCBOOK_FILES) to $(EXTRA_DIST). Don't include the generated
protocol.html in the tarball.
2008-11-23 18:48:08 +01:00
a165ee25e8
doc: merged protocol documentation from the wiki
...
Over the years, a lot of commands have been added to MPD which were
documented only in the wiki
(http://mpd.wikia.com/wiki/Protocol_Reference ). Merge all missing
commands from there.
2008-11-20 22:20:01 +01:00
63a885026a
doc: rephrase descriptions
...
Correct lots of grammar and spelling errors. Unify some phrases.
2008-11-20 22:20:01 +01:00
08c7160eee
doc: improved XML decorations
...
Wrapped keywords in DocBook tags where appropriate.
2008-11-20 22:20:01 +01:00
90bfe65e54
doc: process protocol.xml with xmlto
...
Generate and install protocol.html if xmlto is available.
2008-11-20 08:59:55 +01:00
a3d0e571cc
doc: fix "Repeat" typo in protocol.xml
...
The attribute value must be lower case: <arg rep="repeat">
2008-11-20 08:59:54 +01:00
a3fd74d0dc
doc: converted doc/COMMANDS to DocBook
...
The goal is to have one structured document which is the authoritative
protocol specification. The documentation which currently resides in
the wiki will be merged.
2008-11-19 21:16:19 +01:00
f61bb4c8cf
update mpdconf.example that shout ouput encoding and protocol settings are optional
2008-10-31 13:54:46 +01:00
0c43f78b11
replace tabs with space in shout audio_output example
2008-10-31 12:20:49 +01:00
20ec1a4810
Makefile.am: install documentation
2008-10-25 21:32:10 +02:00
7aca4cd194
stored_playlist: send timestamps
...
Send last modification timestamps to the client. This allows the
client to see when another client modifies a stored playlist.
2008-10-22 19:18:39 +02:00
9c983c442c
command: added command "listplaylists"
...
"listplaylists" returns a list of all stored playlists. This command
seems more elaborate than listing them below "lsinfo".
2008-10-22 19:16:56 +02:00
b2839540d6
Makefile.am: fix automake 1.6 errors
...
When building with the ancient automake 1.6 version, the following
errors occur:
Makefile.am:5: invalid variable `doc_DATA'
doc/Makefile.am:2: invalid variable `doc_DATA'
This patches renames some internal variables.
2008-10-16 15:00:02 +02:00
cf7ed8c5df
idle: client command "noidle" aborts idle
2008-10-15 18:21:57 +02:00
0031eaaff5
pulse: clarify the meaning of multiple server names
...
The manual page suggests that you can specify multiple servers, but it
did not clarify what that means.
2008-10-15 07:49:32 +02:00
a3e3d2c950
command: added command "idle"
...
"idle" waits until something noteworthy happens on the server,
e.g. song change, playlist modified, database updated. This allows
clients to keep up to date without polling.
2008-10-14 22:38:14 +02:00
50e038d1ef
Makefile.am: don't override $(docdir)
...
Makefile.am sets docdir = $(prefix)/share/doc/$(PACKAGE). This
overrides the setting specified in ./configure --docdir.
2008-10-14 18:32:46 +02:00
86782faa18
alsa: optionally disable resampling and others
...
Added mpd.conf options for disabling automatic resamling, sample
format and channel conversion. This way, users may choose to override
ALSA's automatic resampling, and use libsamplerate instead.
2008-10-14 17:21:49 +02:00
79a1811c11
shout: fix manual page typo
...
A ".TP" was missing, and broke the manual page's layout.
2008-10-14 17:21:47 +02:00
2139d8bba8
shout: make the protocol configurable
...
Added configuration parameter "protocol" which lets the user choose
from 3 shout protocols. This adds support for real shoutcast servers.
2008-10-12 12:14:51 +02:00
531a44e9e3
COMMANDS: assorted formatting fixes
...
* spaces => tabs
* long lines wrapped
* trailing whitespace killed
2008-09-28 16:57:35 +02:00
b26b57b677
COMMANDS: document moveid with negative _to_ argument, too
2008-09-28 16:57:23 +02:00
Florian Schlichting