This adds support for using a Heimdal-specific PKIX extension to derive
a maximum Kerberos ticket lifetime from a client's PKINIT certificate.
KDC configuration parameters:
- pkinit_max_life_from_cert_extension
- pkinit_max_life_bound
If `pkinit_max_life_from_cert_extension` is set to true then the
certificate extension or EKU will be checked.
If `pkinit_max_life_bound` is set to a positive relative time, then that
will be the upper bound of maximum Kerberos ticket lifetime derived from
these extensions.
The KDC config `pkinit_ticket_max_life_from_cert` that was added earlier
has been renamed to `pkinit_max_life_from_cert`.
See lib/hx509 and lib/krb5/krb5.conf.5.
This adds a KDC configuration parameter that can be used to indicate
that a PKINIT client's certificate's notAfter overrides the client
principal's HDB entry's max_life. This parameter is a relative time
parameter, and it enables this only if set to a non-zero value (defaults
to zero). The value of this parameter caps the max_life inferred from
the certificate.
- Formalize the TYPE:collection_name:subsidiary_name naming scheme for
ccaches in ccache collections
- KEYRING: ccaches are weird because they have one more optional field: the
"anchor", so rather than just assume a naming convention everywhere, we
add new functions as well
- Add krb5_cc_{resolve,default}_sub() that allows one to specify a
"subsidiary" ccache name in a collection separately from the
collection name
- Add krb5_cc_{resolve,default}_for() which take a principal name,
unparse it, and use it as the subsidiary ccache name (with colons
replaced)
- Make kinit use the new interfaces
- Add missing DIR ccache iteration functionality
- Revamps test_cc
- Add krb5_cc_get_collection() and krb5_cc_get_subsidiary()
- Bump the ccops SPI version number
- Add gss_store_cred_into2()
- Make MEMORY:anonymous not linked into the global MEMORY ccache
collection, and uses this for delegated cred handles
TBD:
- Split this up into a krb5 change and gss mech_krb5 change?
- Add krb5_cc_init_and_store() utility, per Greg's suggestion?
The --connect-to option is much nicer and better than --resolve for testing,
but for testing against localhost --resolve is good enough and available in
older versions of curl.
This commit adds support for proof of posession to the kx509 protocol by
using PKCS#10 CSRs.
This allows conveyance of extReq CSR attributes requesting desired
Certificate Extensions.
This commit adds support for kx509 in libkrb5, and revamps the KDC's
kx509 service (fixing bugs, adding features).
Of note is that kx509 is attempted optimistically by the client, with
the certificate and private key stored in the ccache, and optionally in
an external PEM or DER file.
NOTE: We do not optimistically use kx509 in krb5_cc_store_cred() if the
ccache is a MEMORY ccache so we don't generate a key when
accepting a GSS context with a delegated credential.
kx509 protocol issues to be fixed in an upcoming commit:
- no proof of possession (this is mostly not too bad, but we'll want to
fix it by using CSRs)
- no algorithm agility (only plain RSA is supported)
- very limited (no way to request any options in regards to the
requested cert)
- error codes are not very useful
Things we're adding in this commit:
- libkrb5 kx509 client
- automatic kx509 usage hooked in via krb5_cc_store_cred() of start TGT
- per-realm templates on the KDC side
- per-realm issuer certificates
- send error messages on the KDC side
(this is essential to avoid client-side timeouts on error)
- authenticate as many error messages
- add a protocol probe feature so we can avoid generating a
keypair if the service is not enabled
(once we add support for ECC algorithms we won't need this
anymore; the issue is that RSA keygen is slow)
- support for different types of client principals, not just username:
- host-based service and domain-based service, each with its own
template set per-{realm, service} or per-service
(the idea is to support issuance of server certificates too, not
just client/user certs)
- more complete support for SAN types
- tests (including that PKINIT->kx509->PKINIT works, which makes it
possible to have "delegation" of PKIX credentials by just delegating
Kerberos credentials)
- document the protocol in lib/krb5/kx509.c
Future work:
- add option for longer-ticket-lifetime service certs
- add support for ECDSA, and some day for ed25519 and ed448
- reuse private key when running kinit
(this will require rethinking how we trigger optimistic kx509
usage)
- HDB lookup for:
- optional revocation check (not strictly necessary)
- adding to certificates those SANs listed in HDB
- hostname aliases (dNSName SANs)
- rfc822Name (email)
- XMPP SANs
- id-pkinit-san (a user could have aliases too)
- support username wild-card A RRs, ala OSKT/krb5_admin
i.e., if a host/f.q.d.n principal asks for a certificate for
some service at some-label.f.q.d.n, then issue it
(this is not needed at OSKT sites because OSKT already
supports keying such service principals, which means kx509
will issue certificates for them, however, it would be nice
to be able to have this independent of OSKT)
(a better way to do this would be to integrate more of OSKT
into Heimdal proper)
- a kx509 command, or heimtools kx509 subcommand for explicitly
attempting use of the kx509 protocol (as opposed to implicit, as is
done in kinit via krb5_cc_store_cred() magic right now)
Issues:
- optimistically trying kx509 on start realm TGT store -> timeout issues!
- newer KDCs will return errors because of this commit; older ones
will not, which causes timouts
- need a separate timeout setting for kx509 for optimistic case
- need a [realm] config item and DNS SRV RR lookup for whether a
realm is expected to support kx509 service
Anonymous PKINIT tickets discard the realm information used to locate the
issuing AS. Store the issuing realm in the credentials cache in order to locate
a KDC which can renew them.
even if tgt used an enctype with a different checksum.
Per [MS-SFU] 2.2.1 PA-FOR-USER the checksum is always
HMAC_MD5, and that's what Windows and MIT clients send.
In heimdal both the client and kdc use instead the
checksum of the tgt, and therefore work with each other
but windows and MIT clients fail against heimdal KDC.
Both Windows and MIT KDC would allow any keyed checksum
to be used so Heimdal client work fine against it.
Change Heimdal KDC to allow HMAC_MD5 even for non RC4
based tgt in order to support per-spec clients.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
- Add --keepold/keepallold/pruneall options to various kadmin/ktutil
commands. Default behavior to "prune old keys".
- When setting keys for a service, we need to specify enctypes for it:
- Always use kadm5_randkey_principal_3() instead of the older
kadm5_randkey_principal().
- Add krb5_string_to_keysalts2(), like MIT's krb5_string_to_keysalts(),
but with a context, and simpler.
- Add --enctypes options to various kadmin/ktutil commands.
- Add [libdefaults] supported_enctypes param with enctype[:salttype]
list.
- Add [realms] realm supported_enctypes param with enctype[:salttype]
list.
Default to aes128-cts-hmac-sha1-96:normal.
The meaning of the two is different and we should
not implicitly set both if one was requested (this
aligns the logic with MIT kinit -C/-E options).
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
This patch adds the "enforce_on_admin_set" configuration knob in the
[password_quality] section. When this is enabled, administrative password
changes via the kadmin or kpasswd protocols will be subject to password quality
checks. (An administrative password change is one where the authenticating
principal is different to the principal whose password is being changed.)
Note that kadmin running in local mode (-l) is unaffected by this patch.
From a suggestion by nicowilliams, put double quotes aroung the varaible
$foopassword in case the password contains whitespace or other special
characters.
When we use a custom patch that makes strong passwords required even for
administrators the check-kadmin test will fail because "foo" (the password
used in check-kadmin.in) is not a strong password. So, we make the
password used in check-kadmin.in settable as a parameter. This way, we
only have to change one line of check-kadmin.in rather than a dozen to get
check-kadmin to pass when using the strong-passwords everywhere patch.
Note that this change makes no real change to any of the tests in
check-kadmin.in: no tests are changed, removed, or added.
Though a race was never observed, the re-sync, slave DB deletion,
master changes and restart did not take into account late changes
in the master before slave down.
Creation of a random key HDB entry takes 3 updates, not one. Instead of
hard-coding this magic count, wait for the appearance of the expected
entry with no "invalid" flag among its attributes.
Commit f469fc6 (2010-10-02) inadvertently caused the previous hop realm
to not be added to the transit path of issued tickets. This may, in
some cases, enable bypass of capath policy in Heimdal versions 1.5
through 7.2.
Note, this may break sites that rely on the bug. With the bug some
incomplete [capaths] worked, that should not have. These may now break
authentication in some cross-realm configurations.
