Commit Graph

1665 Commits

Author SHA1 Message Date
Eric Wong
30ed6bcf22 inputStream_http: signal the server to close after all requests
We want the partial content goodies of HTTP/1.1 without
requiring persistent connections.  Persistent connections across
multiple HTTP requests don't really help in the case of MPD,
either, because our content is usually big and heavy.

Note: this puts MPD at the hands of the server to correctly
close() the TCP connection we're using.  If we connect to a
rogue server that keeps the connection alive even when request
not to, we'll spin :(  However, encountering such a server
is very unlikely...

git-svn-id: https://svn.musicpd.org/mpd/trunk@6867 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-08 01:06:29 +00:00
Eric Wong
251216a552 decode: fix seek when paused
We need to SIGCONT the decoder process to allow for seeking
while paused.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6864 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-07 01:17:09 +00:00
Eric Wong
45c9989849 get rid of unused DECODE_SUFFIX_* #defines
These haven't been used for several years

git-svn-id: https://svn.musicpd.org/mpd/trunk@6863 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-07 00:59:29 +00:00
Eric Wong
56274fd016 Once again get rid of busy waiting and use SIGSTOP for pause
The problems I had were related to the OSS driver and USB
device I was using.  The problems existed even with the old
busy-waiting scheme enabled.

OSS  - Bithead USB     => bad
ALSA - Bithead USB     => OK
OSS  - Onboard i8x0    => OK
ALSA - Onboard i8x0    => OK

bad - slow shutdown, pauses, dropped audio after pause/resume

git-svn-id: https://svn.musicpd.org/mpd/trunk@6861 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-06 01:07:49 +00:00
Eric Wong
7024700cc5 return to busy-waiting on pause for now..
Until we can fix it properly (or replace it with a cleaner event
system), I don't want this in trunk.  Currently there are
strange pauses when queueing and during shutdown that I can't
seem to figure out right away.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6860 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-06 00:45:34 +00:00
Eric Wong
fe584bb11c send SIGCONT to the player process whenever we need to busy wait on it
This fixes the problem of playlist moving/changnig while we're paused

Followup to r6822

git-svn-id: https://svn.musicpd.org/mpd/trunk@6859 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-06 00:19:33 +00:00
Eric Wong
b2ae8da509 conf: use getBoolBlockParam for block params, too
git-svn-id: https://svn.musicpd.org/mpd/trunk@6858 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-05 23:59:36 +00:00
Eric Wong
4a2122eaf4 conf: improved boolean config parameter handling from -ke
the force flag will issue FATAL() if an invalid value is
specified

git-svn-id: https://svn.musicpd.org/mpd/trunk@6857 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-05 23:59:33 +00:00
Eric Wong
ac58dce7df Redirect stdin *before* we establish a listen socket
This way we'll avoid listening on fd=0 and have a better
chance of having fd=0 as /dev/null

git-svn-id: https://svn.musicpd.org/mpd/trunk@6852 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-05 01:19:37 +00:00
Eric Wong
7992ff37d0 log: oops, fix a syntax error
(yes, it helps to actually compile code before committing it)

git-svn-id: https://svn.musicpd.org/mpd/trunk@6851 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-04 21:08:35 +00:00
Eric Wong
146485d0cb log: better bug avoidance for libraries incorrectly handling fd=0
We redirect stdin to /dev/null to work around a libao bug, but
this bug has been fixed in libao since 2003 (according to jat).

However, there are likely other bugs in other libraries (and
even our code!) that handle fd=0 incorrectly and I'd rather not
take the risk[1].  So So it's easiest to just keep
fd=0==/dev/null for now...

[1] - I've seen several of these myself...

git-svn-id: https://svn.musicpd.org/mpd/trunk@6849 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-04 19:45:24 +00:00
Eric Wong
203a5ed26d zeroconf: avoid passing NULLs to Avahi *_free() routines
This should fix Debian bug #428551
(mpd crashes when restarting the dbus daemon)

git-svn-id: https://svn.musicpd.org/mpd/trunk@6844 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-02 02:18:09 +00:00
Eric Wong
bbe8b0efd8 Fix endless loop when mpd is launched from a non-interactive shell.
Thanks to _noth_ for the patch, this fixes Mantis bug #1534

_noth_ wrote:
> When MPD is launched from a non-interactive shell, it enters an endless
> loop, filling up its error log file with "error accept()'ing" messages.
> This is caused by the fact that stdin is already closed when mpd starts
> up.  listenOnPort() opens up the first of its sockets as fd 0 (the first
> empty fd table position). Then, setup_log_output()->redirect_stdin()
> overwrites fd0 (fd=open("/dev/null",...); dup2(fd, STDIN_FILENO);)
> without checking if it corresponds to the actual standard input (or if
> it is open in the first place).  This means that listenSockets[0].fd now
> is a fd for /dev/null, thus doIOForInterfaces()->getConnections() can't
> accept(2) on it and fails with the above error. The attached patch fixes
> this for me.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6843 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-02 01:11:28 +00:00
Eric Wong
c2e742106f interface: fix IPV6 hostname buffer deallocation from automatics
The host buffer that hostname pointed to is no longer on the
stack by the time the SECURE() message is printed.  So make it
static and thus accessible to all.  We won't be calling this
stuff in the middle of a child process/thread/task, so there's
no

Also, hostname is a constant string we shouldn't modify, so mark
it as const char *.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6842 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-09-01 12:20:49 +00:00
Eric Wong
c5c8548ba2 inputPlugins/flac: improve error messages
For the default: case, just use the error message that libFLAC
provides instead of using something ambiguous.  Also, this gets
rid of long lines in the code, making it easier to digest.

Of course, we save ~100 bytes of text space in the process :)

git-svn-id: https://svn.musicpd.org/mpd/trunk@6830 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-28 05:01:19 +00:00
Eric Wong
cd6e584c35 log: cleanup: avoid "magic" numbers
We used a bare '15' in several places and it's not immediately
obvious where it came from.  This makes it more obvious

git-svn-id: https://svn.musicpd.org/mpd/trunk@6829 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-28 05:01:16 +00:00
J. Alexander Treuman
1b045d0672 removing debug messages from signal handlers
As unfortunate as it is to remove such useful debugging messages, it's
necessary to fix a potential deadlock with signal handling.  A bunch of
functions the debug functions call aren't safe to call from a signal
handler.  There are some alternate solutions, but they're neither pretty
nor simple.  So just remove them entirely for now.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6828 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-27 21:18:35 +00:00
J. Alexander Treuman
752bf24b74 interface: print whole debug message at once
Using SECURE once without a \n, and again with one, results in a timestamp
mid-line.  Let's not do that.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6827 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-27 21:10:44 +00:00
J. Alexander Treuman
8d89add8e7 adding \n to a bunch of error message strings
git-svn-id: https://svn.musicpd.org/mpd/trunk@6826 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-27 21:03:22 +00:00
Eric Wong
f18e524176 send SIGSTOP to player and decoder processes on pause, too
as with the stop command, this will cause the player and decoder
to suspend and not wake up hundreds of times a second to poll
a variable for wakeup.  This will reduce power consumption
on some CPUs while mpd is paused and not playing.

tests:

pause && unpause => OK

pause && stop && play => OK

pause && exit && restart w/statefile && unpause => OK

pause && block sound device && \
unpause => failed to open sound device \
=> still paused and suspended => unblock sound device &&
unpause => OK (playing)

In all cases, the player process releases the audio device
when paused before going into the suspended state.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6822 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-27 09:36:11 +00:00
Eric Wong
0f2e9ee662 export FATAL() with noreturn attribute
This attribute was set in log.c, but not exported to other
modules in log.h

This allows us to remove some unneccessary variable
initializations that were added in r6277.  I did
audioOutput_shout.c a bit differently, to avoid some
jumps.

before:
$ size src/mpd
text    data     bss     dec     hex filename
225546    4040   14600  244186   3b9da src/mpd

after:
$ size src/mpd
text    data     bss     dec     hex filename
224698    4040   14600  243338   3b68a src/mpd

git-svn-id: https://svn.musicpd.org/mpd/trunk@6821 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-27 08:05:55 +00:00
J. Alexander Treuman
75e34a19a3 ChangeLog: adding LAME tag ReplayGain
git-svn-id: https://svn.musicpd.org/mpd/trunk@6810 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-25 17:02:41 +00:00
J. Alexander Treuman
fe4b16ed96 inputPlugins/mp3_plugin: parse LAME tags for ReplayGain info
Parse ReplayGain info in LAME tags and use it if no ID3v2 ReplayGain tags
are found.  This is currently a bit unsafe, as apparently some LAME tags
have bogus ReplayGain values.  But I'm finding a lot of MP3s with valid
LAME tags that fail the LAME tag CRC check.  So until I figure out why
that's happening, it's an unreliable method for checking if the LAME tag is
valid.

A big thanks to tmz for writing the original patch.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6798 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-22 16:42:08 +00:00
J. Alexander Treuman
5e1deab05f decode: close audio device after initial open if paused
Currently, if we start decoding while the pause flag is set, we open the
audio device and leave it opened, blocking other apps from using it.  The
obvious thing to do is to not open the audio device if the pause flag is
set, but the open call also sets the audio format.  Therefore I'm leaving
the open call in, and just closing it immediately afterwards if the pause
flag is set.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6745 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-12 19:23:48 +00:00
J. Alexander Treuman
d286294805 decode: reformatting for better readability
git-svn-id: https://svn.musicpd.org/mpd/trunk@6742 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-12 19:15:06 +00:00
J. Alexander Treuman
3fedc4d806 audioOutputs/audioOutput_shout: adding timers back
The shout plugin will now feign playback until the connect timeout is hit,
preventing connection attempts from blocking playback on local outputs.
Note that this patch is very different from remiss' original one.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6738 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-11 21:36:23 +00:00
Qball Cow
e195fb8100 Cleanup a outcommented debug statement
git-svn-id: https://svn.musicpd.org/mpd/trunk@6736 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-08-11 11:36:13 +00:00
Qball Cow
4811eadb4a Extra debug output
git-svn-id: https://svn.musicpd.org/mpd/trunk@6689 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-07-16 20:31:37 +00:00
J. Alexander Treuman
54e6b27989 log: flush the warning log after redirecting stderr to the log files
Previously, the warning log was only flushed if creating the db or logging
to stdout.  This meant that under normal circumstances (no db creation,
logging to files) the warning log was never flushed.  This caused a bug
when a warning was printed for each call to the status command where the
warning buffer would grow endlessly, eventually using more and more CPU to
reallocate it.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6660 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-29 18:41:02 +00:00
J. Alexander Treuman
5a2f854914 replayGain: adding DEBUG messages when computing scale
git-svn-id: https://svn.musicpd.org/mpd/trunk@6658 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-25 14:34:40 +00:00
J. Alexander Treuman
f66b834f8f inputPlugins/wavpack_plugin: enable ReplayGain code
Turns out the fix was as simple as specifying the OPEN_TAGS flag when
opening the file.  Thanks again to Kodest for figuring this one out.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6657 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-25 14:24:30 +00:00
J. Alexander Treuman
f83d1aa460 inputPlugins/wavpack_plugin: adding dummy code for ReplayGain support
This ReplayGain code is currently disabled because WavpackGetTagItem can't
seem to find replaygain_* fields in APEv2 tags (which is how wvgain stores
ReplayGain values).  Additionally, because APEv2 tags are stored at the end
of the file, this code is only implemented for regular files and not HTTP
streams.  Using HTTP seeking it *may* be possible to implement it for both.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6656 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-25 13:37:21 +00:00
J. Alexander Treuman
ac5a7c2d82 decode: prefer fileDecodeFunc over streamDecodeFunc for files
Only wavpack implements both fileDecodeFunc and streamDecodeFunc, and it's
fileDecodeFunc provides more functionality.  So try using that first.

This commit also fixes a bug where the plugin test loop wouldn't break once
a suitable plugin was found if it used fileDecodeFunc.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6655 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-25 13:22:51 +00:00
J. Alexander Treuman
ff6a8e2ade Updating Kodest's name/email.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6654 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-25 12:13:45 +00:00
J. Alexander Treuman
08ca0ae2e8 Check for pkg-config unconditionally. It might not be needed if we disable
a ton of optional functionality, but it's getting hard to keep track of it
all.  So let's just be lazy.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6653 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-24 21:31:08 +00:00
J. Alexander Treuman
f31b7b4677 Updating some ./configure --help text.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6652 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-24 21:26:44 +00:00
J. Alexander Treuman
db47ab163a Adding WavPack support. Patch courtesy Kodest.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6651 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-24 20:40:04 +00:00
J. Alexander Treuman
df32eed2cc Use parsePath for the fifo output's path parameter.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6623 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-13 15:37:46 +00:00
J. Alexander Treuman
c734c13b5c Adding parsePath and making parseConfigFilePath use it.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6622 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-13 15:27:09 +00:00
J. Alexander Treuman
b496239e76 Adding FIFO audio output. This is pretty much identical to the old one,
except that it now uses a timer for throttling.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6621 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-13 14:15:30 +00:00
J. Alexander Treuman
1928a40486 Adding some ChangeLog entries.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6558 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-12 18:39:47 +00:00
J. Alexander Treuman
8de17dbed0 Use <= when comparing (current time - start time) to a timeout. This way
if the clock ticks right after we get the start time and the timeout is
only one second, we'll still wait a full second instead of returning
immediately.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6557 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-12 18:33:26 +00:00
J. Alexander Treuman
6f2be47270 Make the shout timeout configurable. The default is still 2 seconds.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6556 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-12 18:28:57 +00:00
J. Alexander Treuman
3c5cecb828 Redoing remiss's shout patch. This time, just block on open() instead of
pretending to play while we wait for the connection to timeout.  This
removes the need for timers, and thus removes the now unnecessary
timer_get_runtime_* function(s) from the timer code.

The changes made compared to the pre-patch shout plugin are:
* Block while connecting, timing out after 2 seconds.
* Close the device, and not just the connection, if play returns -1.
* Remove sd->last_err (it's always assigned before use).
* Some minor cleanups.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6555 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-12 17:58:17 +00:00
J. Alexander Treuman
bd0620ff72 Load shout first instead of last. This makes it more likely to block other
outputs, which is actually desired behaviour.  This way if the shout server
takes a while to respond, the shout output can block until connected
without messing up other audio outputs.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6554 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-12 17:49:31 +00:00
J. Alexander Treuman
2d8f36cefb Load the shout plugin last. This will make sure it's played to last,
reducing the likelyhood of it blocking other outputs.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6543 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-10 22:58:56 +00:00
J. Alexander Treuman
4e5cffaa7b If an audio output is in state DEVICE_ENABLE, and openAudioOutput fails,
leave it in that state.  Likewise, if an audio output is in state
DEVICE_ON, and reopening the device due to a format change fails, change it
to state DEVICE_ENABLE.  This will prevent flushAudioBuffer from even
attempting to play audio on a closed device (even though it would fail
anyway).

git-svn-id: https://svn.musicpd.org/mpd/trunk@6529 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-09 21:40:56 +00:00
J. Alexander Treuman
8feaf84b24 Tidying up some code.
git-svn-id: https://svn.musicpd.org/mpd/trunk@6527 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-09 19:19:33 +00:00
J. Alexander Treuman
0bfe6cabce Remove a useless if (quit) block. It's enclosed in two while loops: the
top depending on !quit, which doesn't set it anywhere before the if (quit)
block is reached, and the inner one which doesn't set quit at all.  Since
it's a local variable and can't be modified externally, it'll never be hit.

git-svn-id: https://svn.musicpd.org/mpd/trunk@6524 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-09 16:04:00 +00:00
Roger Bystrøm
d50fc3849a This should resolve some of the timing issues experienced after switching from blocking to non-blocking shout api
* Wait ten seconds before declearing the shout server unreachable
* Fix a state where it would never attempt to connect if it had previously failed

It isn't perfect yet, but I'd like some testing on it from other setups


git-svn-id: https://svn.musicpd.org/mpd/trunk@6523 09075e82-0dd4-0310-85a5-a0d7c8717e4f
2007-06-09 15:51:20 +00:00