InputPlugin is the API which is implemented by a decoder plugin. This
belongs to the public API/ABI, so move it to decoder_api.h. It will
later be renamed to something like "decoder_plugin".
Since we have merged dc->stop, dc->seek into one variable, we don't
have to check both conditions at a time; we can replace "!stop &&
!seek" with "none".
dc->audioFormat is set once by the decoder plugins before invoking
decoder_initialized(); hide dc->audioFormat and let the decoder pass
an AudioFormat pointer to decoder_initialized().
We are now beginning to remove direct structure accesses from the
decoder plugins. decoder_clear() and decoder_flush() mask two very
common buffer functions.
Code simplification: since we are not using in-band signalling with
the chunk index anymore, we can just return a pointer to the tail
chunk instead of the index.
OutputBuffer should be a more generic low-level library, without
dependencies to the other headers. This patch adds the field
"notify", which is used to signal the player thread. It is passed in
the constructor, and removes the need to compile with the decode.h
header.
After the decoder has been initialized and the audio device has been
opened, don't sleep. The decoder plugin won't do anything special nor
will it care to wake us up for some reason.
decoder_initialized() sets the state to DECODE_STATE_DECODE and wakes
up the player thread. It is called by the decoder plugin after its
internal initialization is finished. More arguments will be added
later to prevent direct accesses to the DecoderControl struct.
The decoder struct should later be made opaque to the decoder plugin,
because maintaining a stable struct ABI is quite difficult. The ABI
should only consist of a small number of stable functions.
Don't use wrappers like player_wakeup_decoder_nb(). These have been
wrappers calling notify.c functions, for compatibility with the
existing code when we migrated to notify.c.
dc_command_finished() is invoked by the decoder thread when it has
finished a command (sent by the player thread). It resets dc.command
and wakes up the player thread. This combination was used at a lot of
places, and by introducing this function, the code will be more
readable.
Busy wait loops are a bad thing, especially when the response time can
be very long - busy waits eat a lot of CPU, and thus slow down the
other thread. Since the other thread will notify us when it's ready,
we can use notify_wait() instead.
Much of the existing code queries all three variables sequentially.
Since only one of them can be set at a time, this can be optimized and
unified by merging all of them into one enum variable. Later, the
"command" checks can be expressed in a "switch" statement.
Since pc->current_song denotes the song which the decoder should use
next, we should move it to DecoderControl. This removes one internal
PlayerControl struct access from the decoder code.
Also add pc.next_song, which is manipulated by the playlist code, and
gets copied to dc.next_song as soon as the decoder is started.
Also enable -Wunused-parameter - this forces us to add the gcc
"unused" attribute to a lot of parameters (mostly library callback
functions), but it's worth it during code refactorizations.
If nothing has been read from the input stream, we don't have to
rewind it.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7397 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The variable "to_read" is never modified except in the last iteration
of the while loop. This means the while condition will never become
false, as the body will break before that may be checked.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7396 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This institutes the usage of a separate thread to buffer HTTP
input. It is basically practice code for using the ringbuffer
code which I plan on reusing for the OutputBuffer as well as
further input buffering for disk (networked filesystems over
WAN, laptops on battery, etc).
Each readFromInputStream() call on an HTTP stream can take
several seconds to complete, short reads are avoided.
A single-threaded solution for systems supporting large enough
SO_RCVBUF values should also be possible and will likely be done
in the future; but this lock-free(except when full/empty)
ringbuffer is cool :)
git-svn-id: https://svn.musicpd.org/mpd/trunk@7393 09075e82-0dd4-0310-85a5-a0d7c8717e4f
We'll be using pipes when waiting for I/O, and condition
variables at other times.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7391 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This will allow both the reader and writer threads to
reset the ringbuffer in a thread-safe fashion.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7390 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This will eliminate unnecessary calls to ringbuf_{read,write}_space
git-svn-id: https://svn.musicpd.org/mpd/trunk@7389 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The auth code also has some ugly usages of string generation
which I will eventually replace with something nicer...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7387 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This piece of code is from the JACK Audio Connection Kit
(trimmed down a bit for better readability).
The vector functions now reuse the common iovec struct used by
writev/readv instead of reinventing an identical but
differently-named struct.
From the comments:
> ISO/POSIX C version of Paul Davis's lock free ringbuffer C++ code.
> This is safe for the case of one read thread and one write thread.
License is LGPL 2.1 or later
git-svn-id: https://svn.musicpd.org/mpd/trunk@7386 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Initialize audioOutput->data with NULL in jack_initDriver().
Previously, this was never initialized, although the other functions
relied on it being NULL prior to jack_openDevice().
This patch addresses bug 0001641[1]. In contrast to the patch provided
by the bug reporter, it moves the initialization before the "!param"
check.
[1] - http://musicpd.org/mantis/view.php?id=1641
git-svn-id: https://svn.musicpd.org/mpd/trunk@7375 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Streaming was broken, beacuse the stream URL was never copied to
path_max_fs.
[ew: replaced strcpy with pathcpy_trunc for ease of auditing]
git-svn-id: https://svn.musicpd.org/mpd/trunk@7371 09075e82-0dd4-0310-85a5-a0d7c8717e4f
During the decoder thread main loop, dc.state must be
DECODE_STATE_STOP. Explicitly assigning it after the "dc.stop" check
is redundant.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7366 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The function wait_main_task() is racy: if the function
wakeup_via_cond() sees the mutex is locked just before
wait_main_task() executes pthread_cond_wait(), the main thread blocks
forever.
Work around this issue by adding a "pending" flag just like in my
notify.c code. A standards-compliant solution should be implemented
later.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7365 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In lazy mode (previously the default), outputBuffer.c only wakes up
the player when it was previously empty. That caused a deadlock when
the player was waiting for buffered_before_play, since the decoder
wouldn't wake up the player when buffered_before_play was reached. In
non-lazy mode, always wake up the player when a new chunk was decoded.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7364 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When we are in an input plugin, dc.current_song should already be
set. Use it instead of pc.current_song.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7363 09075e82-0dd4-0310-85a5-a0d7c8717e4f
We had functions names varied between
outputBufferFoo, fooOutputBuffer, and output_buffer_foo
That was too confusing for my little brain to handle.
And the global variable was somehow named 'cb' instead of
the more obvious 'ob'...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7355 09075e82-0dd4-0310-85a5-a0d7c8717e4f
All of our main singleton data structures are implicitly shared,
so there's no reason to keep passing them around and around in
the stack and making our internal API harder to deal with.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7354 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This at least makes the argument list to a lot of our plugin
functions shorter and removes a good amount of line nois^W^Wcode,
hopefully making things easier to read and follow.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7353 09075e82-0dd4-0310-85a5-a0d7c8717e4f
It actually increases our image size a small bit and may even
hurt performance a very small bit, but makes the code less
verbose and easier to manage.
I don't see a reason for mpd to ever support playing multiple
files at the same time (users can run multiple instances of mpd
if they really want to play Zaireeka, but that's such an edge
case it's not worth ever supporting in our code).
git-svn-id: https://svn.musicpd.org/mpd/trunk@7352 09075e82-0dd4-0310-85a5-a0d7c8717e4f
signal is all we need since we only have one waiter and
likely faster
git-svn-id: https://svn.musicpd.org/mpd/trunk@7349 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The select() in the main event loop blocks now (saving us many
unnecessary wakeups). This interacted badly with the threads
that were trying to wakeup the main task via
pthread_cond_signal() since the main task was not blocked
on a condition variable, but on select().
So now if we detect a need to wakeup the player, we write
to a pipe which select() is watching instead of blindly
calling pthread_cond_signal().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7347 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Since tailChunk() automatically flushes full buffers, we do not have
to check this in every iteration of sendDataToOutputBuffer().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7343 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Checking dc->stop in the while condition and again after the while
loop costs some CPU cycles we should save.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7340 09075e82-0dd4-0310-85a5-a0d7c8717e4f
OutputBuffer.currentChunk contains redundant data: it is either -1
when there is no chunk which is currently being written, or it equals
"end". If we always keep chunk[end] in a valid state, we can remove
OutputBuffer.currentChunk.
This patch may look a bit clumsy, especially flushOutputBuffer(), but
that will be fixed later with an major OutputBuffer API overhaul.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7339 09075e82-0dd4-0310-85a5-a0d7c8717e4f
output_buffer_expand() moves the cb->end to the new position (only its
current successor is allowed) and wakes up the player if is waiting
for the decoder. This simplifies flushOutputBuffer().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7338 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The current OutputBuffer object is allocated statically, i.e. it is
zeroed. To be safe for other cases in the future, also initialize the
other elements.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7337 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The decoder should not wake up the player when it did not produce a
flushed chunk. Move the decoder_wakeup_player() call to
flushOutputBuffer() and invoke it only if the buffer was previously
empty.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7336 09075e82-0dd4-0310-85a5-a0d7c8717e4f
During my tests, it happened that data->position>newPosition. I have
not yet fully understood why this can happen; for now, replace this
with a run-time check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7334 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The patch "convert blocks until the buffer is full" did not update
data->chunk_length correctly: it added the number of samples, not the
number of bytes. Multiply that with bytes_per_channel
git-svn-id: https://svn.musicpd.org/mpd/trunk@7332 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In the patch "special optimized case for 16bit stereo", the check for
"num_channels==2" was missing.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7331 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Not having to loop for every sample byte (depending on a variable
unknown at compile time) saves a lot of CPU cycles. We could consider
reimplementing this function with liboil...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7330 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Read frame->header.channels once, and pass only this integer to
flac_convert().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7329 09075e82-0dd4-0310-85a5-a0d7c8717e4f
flacWrite() is the only function which sets data->chunk_length. If we
flush the buffer before we return, we can assume that it is always
empty upon entering flacWrite().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7328 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Move the inner loop which converts samples to flac_convert(). There
it is isolated and easier to optimize. This function does not have to
worry about buffer boundaries; the caller (i.e. flacWrite())
calculates how much is left and is responsible for flushing. That
saves a lot of superfluous range checks within the loop.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7327 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Check for flushing the chunk buffer only once per sample, before
iterating over channels and bytes. This saves another 5% CPU cycles.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7326 09075e82-0dd4-0310-85a5-a0d7c8717e4f
AudioFormat.bits is volatile, and to read it, 3 pointers had to be
deferenced. Calculate this value once. This speeds up this function
by 5%.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7325 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Try to only include headers which are really needed. We should
particularly check all "headers including other headers". The
long-term goal is to have a manageable, small API for plugins
(decoders, output) without so many mpd internals cluttering the
namespace.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7319 09075e82-0dd4-0310-85a5-a0d7c8717e4f
There is no danger that gcc will optimize access to OutputBufferChunk
properties, since decoder and player work in different chunk objects.
It is safe to remove "volatile" here.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7318 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Less global variables: at any invocation of decoder_sleep(), we have a
reference to the DecoderControl anyway, so we should pass it. This
costs less than having to call getPlayerData() in every tiny
function. Maybe some day we will be able to have multiple decoders at
the same time...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7316 09075e82-0dd4-0310-85a5-a0d7c8717e4f
To do proper cleanup before exiting, we have to provide a destructor
for OutputBuffer. One day, valgrind will not complain about memory
leaks!
git-svn-id: https://svn.musicpd.org/mpd/trunk@7315 09075e82-0dd4-0310-85a5-a0d7c8717e4f
"end" is not being used anymore, since we moved most OutputBuffer
struct accesses into methods.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7314 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Don't be mean with integer sizes. Although we will probably never
have more than 32k buffered chunks, we should use 32 bit integers for
addressing them. We do not save very much (some of the saved space is
eaten by alignment anyway), but we save at least one assembler
instruction for converting short to int.
This change requires some more explicit casts, because gcc was less
picky when comparing short with a full int.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7313 09075e82-0dd4-0310-85a5-a0d7c8717e4f
First patch without camelCase ;)
output_buffer_skip() lets us eliminate advanceOutputBufferTo(), and
removes yet another external OutputBuffer struct access.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7312 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Second patch to make OutputBuffer self-contained: since OutputBuffer
now knows its own size, we do not need the global variable
"buffered_chunks" anymore.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7311 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Try to make OutputBuffer self-contained, without depending on a global
variable.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7310 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This is the first patch in a series which removes the shared memory,
and moves all the playerData objects into the normal libc heap.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7304 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Now that we do proper locking and signalling instead of continuous
polling for IPC, a deadlock was found: at the end of a song, the
player thread waits until the main thread sets pc->queueState from
PLAYER_QUEUE_DECODE to PLAYER_QUEUE_PLAY. He is never woken up, since
syncPlaylistWithQueue() does not activate the notification. I added
wakeup_player_nb() to setQueueState(), since the player must be
signalled whenever pc->queueState changes.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7303 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Buffer sizes should be size_t. This is safe here, at least not
unsafer than without the patch. I have no idea why audioBufferSize
and audioBufferPos were explicitly declared as signed integer.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7296 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When growing the audioOutput->convBuffer, we can use free()+malloc()
instead of realloc(), which saves a memcpy().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7295 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The audio output plugins should get a constant pointer, because they
must not modify the buffer. Since the size is a non-negative buffer
size in bytes, we should change its type to size_t.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7293 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In my previous patch set, I forgot to change the
pcm_sizeOfConvBuffer() invocation in convertAudioFormat() to also use
size_t.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7292 09075e82-0dd4-0310-85a5-a0d7c8717e4f
calculateCrossFadeChunks() still returns int, although the caller uses
it as an unsigned value. Since the function body checks for negative
values, it is safe to cast to unsigned.
crossFade() takes signed parameters, although it callers pass unsigned
integers. Change declaration to unsigned.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7291 09075e82-0dd4-0310-85a5-a0d7c8717e4f
There were some const pointers missing in the previous const-cleanup
patch.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7290 09075e82-0dd4-0310-85a5-a0d7c8717e4f
libfaad wants uint32_t pointers. Passing a long pointer is bugged on
amd64.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7289 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The patch "Start using song pointers in core data structures" removed
dc->utf8url, and the adaption for wavpack_plugin.c was missing.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7288 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The new function successor() can be used to simplify a lot of code
lines and saves a lot of "i+>=buffered_chunks" checks.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7285 09075e82-0dd4-0310-85a5-a0d7c8717e4f
currentChunk is a global variable, which renders the whole output
buffer code non-reentrant. Although this is not a real problem since
there is only one global output buffer currently, we should move it to
the OutputBuffer struct.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7284 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This patch rewrites notify.c to use the pthread API, namely
pthread_mutex and pthread_cond. This is a lot cheaper and easier than
the pipe() hack.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7280 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The code paths which return from the functions all have to call
quitDecode(). If we simply break instead of calling quitDecode()
explicitly, this function gets called in the last line of this
function anyway.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7278 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The multi-line expression which calculates sizeToTime is hard to read,
partly because "cb->audioFormat." is too long. Create a separate
inline function in audio.h for that.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7277 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Moved the decision whether to cross-fade the current song to
calculateCrossFadeChunks(). This simplifies the function
decoderParent() and eliminates one layer of indentation.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7276 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Similar to the crossFade() patch: pass chunk objects to playChunk(),
simplify decodeParent() by removing clutter.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7275 09075e82-0dd4-0310-85a5-a0d7c8717e4f
To unify the decoderParent() main loop some more, use it to wait for
the decoder to change the song. Only one single processDecodeInput()
caller left after this patch.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7273 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When there are not enough decode cross-fade chunks in the buffer yet,
the current code does busy-wait, which will delay the decoder even
more. sleep instead, expecting the decoder to wake us up.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7272 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Calling crossFade() with the chunk objects is easier than unrolling
all the chunk properties manually, and decodeParent() can really use
more of these simplifications.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7271 09075e82-0dd4-0310-85a5-a0d7c8717e4f
sizeof() is the more "natural" or "direct" access to the buffer size,
instead of a macro happening to be used to the buffer declaration.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7270 09075e82-0dd4-0310-85a5-a0d7c8717e4f
To make access to OutputBuffer easier, move everything which belongs
to a chunk into its own structure, namely OutputBufferChunk.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7269 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The chunk size should be in outputBuffer.h since the output buffer
code is its primary user.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7268 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Hiding OutputBuffer internals, again. We get an extra assertion in
return.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7267 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The variable "quit" can be removed, since its only setter can use
"break" instead, just like the other code paths.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7266 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The variables "nextChunk" and "crossFadeChunks" are only used when
doCrossFade==1. This means that we do not have to reset these as long
as doCrossFade!=1.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7265 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The cross-fade check is still very complicated whenever it uses
OutputBuffer internals. Greatly simplify another check by introducing
outputBufferRelative().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7264 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Another "don't use OutputBuffer internals" patch. This ignores the
copied "end" value, but I do not think that has ever been a real
issue.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7263 09075e82-0dd4-0310-85a5-a0d7c8717e4f
decoderParent() uses a lot of OutputBuffer internals to see whether
cross-fading should be started. Move these checks to outputBuffer.c,
which also simplifies decoderParent().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7262 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Declare the variables "test" and "fadePosition" in the scope where
they are really used. This removes some of the clutter in the
function decodeParent().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7261 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Eliminating some duplicated and. This also decreases the number of
lines calling processDecodeInput().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7260 09075e82-0dd4-0310-85a5-a0d7c8717e4f
I have spent some time to understand decodeParent(), which does a lot
of obfuscated magic... I find it useful to help others to also
understand it, so I wrote a few comments.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7259 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Another patch indended to improve the CPP macro hell. This enlarges
the function decodeParent(), but it cannot be converted into a
standalone function easily, because it references so many local
variables.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7258 09075e82-0dd4-0310-85a5-a0d7c8717e4f
clearOutputBuffer() also resets currentChunk; this might resolve a
theoretical bug.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7257 09075e82-0dd4-0310-85a5-a0d7c8717e4f
dc->start cannot be true after the loop, because it was the loop
condition. dc->start could have been set by another thread between
the while loop and the if, but I suspect this is not the case the
author intended, so we just remove the dc->start check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7256 09075e82-0dd4-0310-85a5-a0d7c8717e4f
In my opinion, the code becomes more readable when we explicitly check
"==NOERROR" instead of an implicit 0 check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7255 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Macros are ugly, and multi-line macros are even more ugly. This patch
converts processDecodeInput() to a C function. The disadvantage may
be that the function does not have access to the caller's local
variables, which might be regarded as an advantage on the other hand.
For this reason, we have to pass variable references. This costs a
tiny bit of performance, but it's worth eliminating this monster
macro, and further patches will optimize this cost down.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7254 09075e82-0dd4-0310-85a5-a0d7c8717e4f
since clearPlayerQueue() is always called within
lockPlaylistInteraction() / unlockPlaylistInteraction(), it simplifies
the code to add another function which calls these three functions.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7253 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The block after "if" breaks out of the loop. To make the code a
little bit more readable, don't write the rest in an "else" block,
since this code path does not break.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7251 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The method availableOutputBuffer() calculates how many chunks are in
use. This simplifies code which needs this information, and it can
run without knowing OutputBuffer internals. The function knows how to
calculate this when begin>end; this might have been a bug in
decodeParent(), which does not.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7250 09075e82-0dd4-0310-85a5-a0d7c8717e4f
After the previous patch, it is clear that the loop in
advanceOutputBufferTo() can be replaced with a simple assignment.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7249 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The parameter "currentChunkSent" is not used and can be dropped.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7248 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This patch removes some clutter from decodeParent() by moving some
code out.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7247 09075e82-0dd4-0310-85a5-a0d7c8717e4f
realloc() has to copy data to the new buffer. Since convBuffer
contains temporary data only, we can safely use free() plus a new
malloc(), which saves the mempy().
git-svn-id: https://svn.musicpd.org/mpd/trunk@7246 09075e82-0dd4-0310-85a5-a0d7c8717e4f
It is way more complicated than it should be; and
locking it for thread-safety is too difficult.
[merged r7183 from branches/ew]
git-svn-id: https://svn.musicpd.org/mpd/trunk@7241 09075e82-0dd4-0310-85a5-a0d7c8717e4f
I initially started to do a heavy rewrite that changed the way processes
communicated, but that was too much to do at once. So this change only
focuses on replacing the player and decode processes with threads and
using condition variables instead of polling in loops; so the changeset
itself is quiet small.
* The shared output buffer variables will still need locking
to guard against race conditions. So in this effect, we're probably
just as buggy as before. The reduced context-switching overhead of
using threads instead of processes may even make bugs show up more or
less often...
* Basic functionality appears to be working for playing local (and NFS)
audio, including:
play, pause, stop, seek, previous, next, and main playlist editing
* I haven't tested HTTP streams yet, they should work.
* I've only tested ALSA and Icecast. ALSA works fine, Icecast
metadata seems to get screwy at times and breaks song
advancement in the playlist at times.
* state file loading works, too (after some last-minute hacks with
non-blocking wakeup functions)
* The non-blocking (*_nb) variants of the task management functions are
probably overused. They're more lenient and easier to use because
much of our code is still based on our previous polling-based system.
* It currently segfaults on exit. I haven't paid much attention
to the exit/signal-handling routines other than ensuring it
compiles. At least the state file seems to work. We don't
do any cleanups of the threads on exit, yet.
* Update is still done in a child process and not in a thread.
To do this in a thread, we'll need to ensure it does proper
locking and communication with the main thread; but should
require less memory in the end because we'll be updating
the database "in-place" rather than updating a copy and
then bulk-loading when done.
* We're more sensitive to bugs in 3rd party libraries now.
My plan is to eventually use a master process which forks()
and restarts the child when it dies:
locking and communication with the main thread; but should
require less memory in the end because we'll be updating
the database "in-place" rather than updating a copy and
then bulk-loading when done.
* We're more sensitive to bugs in 3rd party libraries now.
My plan is to eventually use a master process which forks()
and restarts the child when it dies:
master - just does waitpid() + fork() in a loop
\- main thread
\- decoder thread
\- player thread
At the beginning of every song, the main thread will set
a dirty flag and update the state file. This way, if we
encounter a song that triggers a segfault killing the
main thread, the master will start the replacement main
on the next song.
* The main thread still wakes up every second on select()
to check for signals; which affects power management.
[merged r7138 from branches/ew]
git-svn-id: https://svn.musicpd.org/mpd/trunk@7240 09075e82-0dd4-0310-85a5-a0d7c8717e4f
autoconf flags for enabling and disabling TCP and unix domain socket
support. Embedded machines without a TCP stack may be better off
without TCP support.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7236 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This trivial patch addresses bug 1639. When a bind_to_address
argument starts with a slash, assume that it is the address of a Unix
domain socket.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7235 09075e82-0dd4-0310-85a5-a0d7c8717e4f
It is a good practice to constify pointers when their dereferenced
data is not modified within the functions or its descendants.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7234 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The parameter "port" is not actually used by establishListen(), and
can be removed. This also allows establishListen() to be used for
socket addresses which have no port.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7233 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The number of buffered chunks can obviously not become negative. The
"buffered_before_play<0" therefore cannot be useful, so let's remove
it, too.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7232 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Do explicit casts before comparing signed with unsigned. The one in
log.c actually fixes another warning: in the expanded macro, there may
be a check "logLevel>=0", which is always true.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7230 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Unfortunately, the function iconv() wants a non-const input buffer.
In this context, we only have a const pointer, which emits a correct
gcc warning. Work around this ugliness with an union-deconst hack.
This is optimized away in the binary.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7229 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The counter variables c_samp and c_chan begin at zero and can never be
negative.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7228 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The local variable d_samp is initialized, but never actually used.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7227 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Use unsigned integers in decoderParent() for chunk numbers which
cannot be negative.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7226 09075e82-0dd4-0310-85a5-a0d7c8717e4f
We don't really care what that variable is, so it might as
well be uninitialized, but valgrind does...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7220 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Don't bother initializing the junk buffer, we really don't care.
The array was also unnecessary and ugly.
Also, avoid returning the byte count we read/wrote since it
unnecessarily exposes internal details of the implementation to
the callers.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7219 09075e82-0dd4-0310-85a5-a0d7c8717e4f
* move set_nonblock{,ing}() into utils.c since we use it
elsewhere, too
* add proper error checking to set_nonblocking()
* use os_compat.h instead of individually #includ-ing system headers
git-svn-id: https://svn.musicpd.org/mpd/trunk@7217 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When the decoder receives SIGCONT during waitNotify(), the kernel
restarts the read() system call. This lets the decoder process block
indefinitely, while the player process waits for it to react. This
should probably be solved with a proper signal handler which aborts
the read() system call, but for now, we just write to the pipe to make
it wake up.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7216 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When the decoder process is faster than the player process, all
decodedd buffers are full at some point in time. The decoder has to
wait for buffers to become free (finished playing). It used to do
this by polling the buffer status 100 times a second.
This generates a lot of unnecessary CPU wakeups. This patch adds a
way for the player process to notify the decoder process that it may
continue its work.
We could use pthread_cond for that, unfortunately inter-process
mutexes/conds are not supported by some kernels (Linux), so we cannot
use this light-weight method until mpd moves to using threads instead
of processes. The other method would be semaphores, which
historically are global resources with a unique name; this historic
API is cumbersome, and I wanted to avoid it.
I came up with a quite naive solution for now: I create an anonymous
pipe with pipe(), and the decoder process reads on that pipe. Until
the player process sends data on it as a signal, the decoder process
blocks.
This can be optimized in a number of ways:
- if the decoder process is still working (instead of waiting for
buffers), we could save the write() system call, since there is
nobody waiting for the notification.
[ew: I tried this using a counter in shared memory, didn't help]
- the pipe buffer will be full at some point, when the decoder thread
is too slow. For this reason, the writer side of the pipe is
non-blocking, and mpd can ignore the resulting EWOULDBLOCK.
- since we have shared memory, we could check whether somebody is
actually waiting without a context switch, and we could just not
write the notification byte.
[ew: tried same method/result as first point above]
- if there is already a notification in the pipe, we could also not
write another one.
[ew: tried same method/result as first/third points above]
- the decoder will only consume 64 bytes at a time. If the pipe
buffer is full, this will result in a lot of read() invocations.
This does not hurt badly, but on a heavily loaded system, this might
add a little bit more load. The preceding optimizations however
are able eliminate the this.
- finally, we should use another method for inter process
notifications - maybe kill() or just make mpd use threads, finally.
In spite of all these possibilities to optimize this code further,
this pipe notification trick is faster than the 100 Hz poll. On my
machine, it reduced the number of wakeups to less than 30%.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7215 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Use unsigned variables for storing the count of items or for iteration
variables. Since there can never be a negative number of items, it
makes sense to use an unsigned data type here. This change is safe
because the unsigned values are only used for adddressing array items.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7214 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The interfaces main loop repeats the select() (non-blocking) after an
event was handled. I do not see any reason for that, since all events
should be handled after the first select(). This double select() does
nothing than consume more CPU cycles.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7213 09075e82-0dd4-0310-85a5-a0d7c8717e4f
mpd sets a 1s select() timeout for no reason. This makes mpd wake up
the CPU, consume some cycles just to see there is nothing to do. We
can save that by specifying NULL instead of a timeout.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7212 09075e82-0dd4-0310-85a5-a0d7c8717e4f
* malloc() => xmalloc() for error checking
* strncpy() replaced with memcpy(),
memcpy appears perfectly safe here and mpd
does not ever use strncpy() (see r4491)
git-svn-id: https://svn.musicpd.org/mpd/trunk@7211 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This patch does the following:
-enables WVC support for streams as well,
-improves MPD inputStream <=> WavPack stream connector,
-fixes two compile warnings (which were caused by MPD API change).
Mantis #1660 <http://musicpd.org/mantis/view.php?id=1660>
git-svn-id: https://svn.musicpd.org/mpd/trunk@7210 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Basically, I don't trust myself nor Max to not have bugs in our
code when switching over to unsigned types, so I've added more
assertions which will hopefully trip and force us to fix these
bugs before somebody can exploit them :)
Some cleanups for parameter parsing using strtol
and error reporting to the user. Also, fix some completely
garbled indentation in inputStream_http.c
git-svn-id: https://svn.musicpd.org/mpd/trunk@7209 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This patch moves code which initializes the OutputBuffer struct to
outputBuffer.c. Although this is generally a good idea, it prepares
the following patch.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7206 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When dealing with in-memory lengths, the standard type "size_t" should
be used. Missing one can be quite dangerous, because an attacker
could provoke an integer under-/overflow, which may provide an attack
vector.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7205 09075e82-0dd4-0310-85a5-a0d7c8717e4f
we do not save anything by limiting a variable to an unsigned char,
since the compiler aligns it at machine word size anyway. however by
using the full machine word, we save one instruction, and we remove
the useless artificial limitation to 255.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7203 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The local variable eof can actually be replaced with a simple "break".
With a negative ret, the value of chunkpos can be invalidated, I am
not sure if this might have been a bug.
[ew: no, a negative ret will correspond to ret == OV_HOLE and ret
will be reset to zero leaving chunkpos untouched (code cleaned up
to make this more obvious]
git-svn-id: https://svn.musicpd.org/mpd/trunk@7202 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The database parser does not check whether the song object has been
initialized yet, which may lead to a NULL pointer dereference. Add
this check.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7201 09075e82-0dd4-0310-85a5-a0d7c8717e4f
strtok() may return NULL if the input is an empty string. The
playlist parser did not check for that.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7200 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Local variables which are never read before the first assignment don't
need initialization. Saves a few bytes of text. Also don't reset
variables which are never read until function return.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7199 09075e82-0dd4-0310-85a5-a0d7c8717e4f
When we expect an integer as result, why would we use the double
precision floating point parser? strtol() is a better match, although
we should probably check for overflows...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7198 09075e82-0dd4-0310-85a5-a0d7c8717e4f
There is unreachable code at several positions, e.g. after an
#if/#end, or after an endless loop. Remove that.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7197 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Tools like "sparse" check for missing downcasts, since implicit cast
may be dangerous. Although that does not change the compiler result,
it may make the code more readable (IMHO), because you always see when
there may be data cut off.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7196 09075e82-0dd4-0310-85a5-a0d7c8717e4f
The while() loop only checks for interrupted system calls (which woudl
never happen if the signal mask were set up properly), but nobody
checks if the fopen() actually succeeds.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7195 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Although it may not happen in mpd code, it is perfectly possible for a
newly allocated file descriptor to be zero. For theoretical
correctness, allow 0.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7194 09075e82-0dd4-0310-85a5-a0d7c8717e4f
For code unification: for me, it looks ugly to do a break in the
command in a while() block. This belongs into the while condition.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7193 09075e82-0dd4-0310-85a5-a0d7c8717e4f
From <http://wiki.xiph.org/index.php/MIME_Types_and_File_Extensions>:
> .oga - audio/ogg
>
> * Ogg Audio Profile (audio in Ogg container)
> * Applications supporting .oga, .ogv SHOULD support decoding
> from muxed Ogg streams
> * Covers Ogg FLAC, Ghost, and OggPCM
> * Although they share the same MIME type, Vorbis and Speex
> use different file extensions.
> * SHOULD contain a Skeleton logical bitstream.
> * Vorbis and Speex may use .oga, but it is not the
> prefered(sic) method of distributing these files because of
> backwards-compatibility issues.
Thanks to Qball and Rasi for the patch.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7191 09075e82-0dd4-0310-85a5-a0d7c8717e4f
We need to ensure we're working with signed types when assigning
them.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7181 09075e82-0dd4-0310-85a5-a0d7c8717e4f
[ew: cleaned up the dirty union hack a bit]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn-id: https://svn.musicpd.org/mpd/trunk@7180 09075e82-0dd4-0310-85a5-a0d7c8717e4f
There are still other ways to run the mpd server out of disk-space,
so permissions are still recommended to protect against malicious
users.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7179 09075e82-0dd4-0310-85a5-a0d7c8717e4f
If we keep processing expired interfaces in a loop,
we'll eventually close it and get fd < 0, causing
assertions to fail.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7168 09075e82-0dd4-0310-85a5-a0d7c8717e4f
It's too ugly and broken (both technically and usability-wise)
to be worth supporting in any stable release.
In one sentence: The queue is a very crippled version of the
playlist that takes precedence over the normal playlist.
How is it crippled?
* The "queueid" command only allows the queuing of songs
ALREADY IN THE PLAYLIST! This promotes having the entire mpd
database of songs in the playlist, which is a stupid practice
to begin with.
* It doesn't allow for meaningful rearranging and movement
of songs within the queue. To move a song, you'd need to
dequeue and requeue it (and other songs on the list).
Why? The playlist already allows _all_ these features
and shows everything a client needs to know about the ordering
of songs in a _single_ command!
* Random was a stupid idea to begin with and unfortunately
we're stuck supporting it since we've always had it. Users
should learn to use "shuffle" instead and not look at their
playlists. Implementing queue because we have the problem of
random is just a bandage fix and digging ourselves a new hole.
This protocol addition was never in a stable release of mpd, so
reverting it will only break things for people following trunk;
which I'm not too worried about. I am however worried about
long-term support of this misfeature, so I'm removing it.
Additionally, there are other points:
* It's trivially DoS-able:
(while true; do echo queueid $song_id; done) | nc $MPD_HOST $MPD_PORT
The above commands would cause the queue to become infinitely
expanding, taking up all available memory in the system. The
mpd playlist was implemented as an array with a fixed (but
configurable) size limit for this reason.
* It's not backwards-compatible. All clients would require
upgrades (and additional complexity) to even know what the
next song in the playlist is. mpd is a shared architecture,
and we should not violate the principle of least astonishment
here.
This removes the following commands:
queueid, dequeue, queueinfo
Additionally, the status field of "playlistqueue: " is removed
from the status command.
While this DoS is trivial to fix, the design is simply too
broken to ever support in a real release.
The overloading of the "addid" command and the allowing of
negative numbers to be used as offsets is far more flexible.
This improved "addid" is completely backwards-compatible with
all clients, and does not require clients to have UI changes or
run additional commands to display the queue.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7155 09075e82-0dd4-0310-85a5-a0d7c8717e4f
While mpd has always protected against the infinite expansion of
the main playlist by limiting its size in memory, however the
new storedPlaylist code has never checked for this limit.
Malicious (or clumsy) users could repeatedly append songs to
stored playlists, causing files to grow increasingly large
on disk. Attempting to load extremely large files into memory
will require mpd to slurp that all into memory, and ultimately
the file would be unusable by mpd because of the configurable
playlist size limit.
Now we limit stored playlists to the max_playlist_length
configuration variable set by the user (default is 16384). We
will refuse to append to playlist files if they hit that limit;
and also refuse to load more than the specified amount of songs
into memory.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7154 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This disables moving the bonkered moving of the current song to
a (negative) offset of itself (introduced in the last commit).
This also short circuits no-op moves when (from == to) and
avoid needless increasing of the playlist version and causes
clients to issue pointless no-op plchanges commands.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7153 09075e82-0dd4-0310-85a5-a0d7c8717e4f
If (and only if) there is a current song in the playlist,
(player could be stopped), allow the move destination
argument to be specified as a negative number.
This means moving any song (besides the current one) to the -1
position will allow it to be moved to the next song in the
playlist. Moving any song to position -2 will move it
to the song after the next, and so forth.
Moving a song to -playlist.length will move it to the song
_before_ the current song on the playlist; so this will
work for repeating playlists, too.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7152 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This will allow "addid \"song_url\" <pos>" to atomically insert a
song at any given playlist position.
If the add succeeds, but the actual movement fails (due to
invalid position), then the song_id will be deleted before
the command returns back to the client, and the client
will get an error response.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7151 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Instead of printing out the Id from playlist.c, instead set
the integer that added_id poitns to if added_id is non-NULL.
This makes the API cleaner and will allow us to use additional
commands to manipulate the newly-added song_id. Callers
(handleAddId) that relied on printId to print it to the given
fd have now been modified to print the ID at a higher-level;
making playlist.c less-dependent on protocol details.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7149 09075e82-0dd4-0310-85a5-a0d7c8717e4f
the code is inconsistent when FLAC_API_VERSION_CURRENT is not defined:
sometimes version > 7 is assumed, and sometimes version <= 7. solve
this by assuming the version is old when FLAC_API_VERSION_CURRENT is
not defined.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn-id: https://svn.musicpd.org/mpd/trunk@7144 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This reduces the text size of the binary slightly when zeroconf
support is not built, and keeps the interface code cleaner as
well.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7133 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Also, lower the impact of compiling this w/o zeroconf by
making the init/teardown functions static no-ops.
Eventually, we should separate the Bonjour and Avahi
code into separate files and have callbacks registered
for each one, avoiding the #ifdef mess we have now...
git-svn-id: https://svn.musicpd.org/mpd/trunk@7132 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Oops!, I went back and documented the change going to parent_path(),
but forgot to change the code that was affected by it.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7131 09075e82-0dd4-0310-85a5-a0d7c8717e4f
This will make refactoring features easier, especially now that
pthreads support and larger refactorings are on the horizon.
Hopefully, this will make porting to other platforms (even
non-UNIX-like ones for masochists) easier, too.
os_compat.h will house all the #includes for system headers
considered to be the "core" of MPD. Headers for optional
features will be left to individual source files.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7130 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Ok, so basename(3) is even more brain-damaged, inconsistent
and/or broken than dirname(3) on most systems, but there are
broken implementations of it out there. Just use our already
existing internal parent_path() function instead and get rid
of the only place where we look for libgen.h.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7129 09075e82-0dd4-0310-85a5-a0d7c8717e4f
DECODE_STATE_STOP is always set as dc->state, and dc->stop
is always cleared. So handle it in decodeStart once rather
than doing it in every plugin.
While we're at it, fix a long-standing (but difficult to
trigger) bug in mpc_decode where we failed to return
if mpc_decoder_initialize() fails.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7122 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Although most PATH_MAX is higher than the 1k buffer we set, some
implementations will set a 256 (or even 64) byte PATH_MAX, so
we should be prepared for that.
git-svn-id: https://svn.musicpd.org/mpd/trunk@7121 09075e82-0dd4-0310-85a5-a0d7c8717e4f
Abstractions should reduce the amount of code and make things
easier to follow. The StoredPlaylist struct did not do that, so
get rid of it and just use our standard linked list
implementation instead.
diffstat agrees with me that the abstraction is pointless:
3 files changed, 60 insertions(+), 90 deletions(-)
git-svn-id: https://svn.musicpd.org/mpd/trunk@7120 09075e82-0dd4-0310-85a5-a0d7c8717e4f
