Replaced the local variable "colon" (which had only temporary meaning)
with the variable "value". It is a pointer to the first byte of the
header value.
Instead of managing a set of method pointers in each input_stream
struct, move these into the new input_plugin struct. Each
input_stream has only a pointer to the plugin struct. Pointers to all
implementations are kept in the array "input_plugins".
MPD's HTTP client code has always been broken, no matter how effort
was put into fixing it. Replace it with libcurl, which is known to be
quite stable. This adds a fat library dependency, but only for people
who need streaming.
MPD shouldn't integrate sources of other libraries. Since libmp4ff is
part of libfaad, we should remove the old copy from src/mp4ff and link
with the current version from libfaad instead.
PA_SAMPLE_S16NE is the only sample format which is suported by both
MPD and pulseaudio. Unfortunately, pulse does not accept 24 bit
samples.
Instead of bailing out with an error message, we should tell the MPD
core to convert all samples to 16 bit for pulse.
This bug caused the audio output devices to stay open, although MPD
wasn't playing: quitDecode() resetted player_control.command, assuming
that the command was STOP. This way, player_task() didn't see the
CLOSE_AUDIO command, and the device was kept open.
Don't clear player_control.command in quitDecode().
When the audio source provides 24 bit samples, don't bother to convert
(lossily) them to 16 bit before jack's floating point conversion - go
directly from 24 bit to float.
The JACK documentation postulates that the process() callback must not
block, therefore locking is forbidden. Anyway, the old code was racy.
Remove all locks, and don't wait for more data to become available -
just send to the port what is already in the buffer.
Another partial frame fix: the silence buffer was 1020 bytes, which
had room for 127.5 24 bit stereo frames. Don't send the partial last
frame in this case.
24 bit output is as important as 16 bit output. Provide a
pcm_convert() implementation which can convert to 24 bit with as
little quality loss as possible.
The old pcm_convert_size() ignored most of the destination format,
e.g. it did not check its sample size, and assumed it is 16 bit.
Simplify and universalize it by using audio_format_frame_size().
Similar to pcm_resample_16(), implement pcm_resample_24(). The 24 bit
implementation is very similar, but it uses src_int_to_float_array()
instead of src_short_to_float_array() before sending data to
libsamplerate.
Use sizeof(sample) instead of hard-coding "2". Although we're in 16
bit right now, this will make code sharing easier when we support
other sample sizes.
libmad produces samples of more than 24 bit. Rounding that down to 16
bits using dithering makes those people lose quality who have a 24 bit
capable sound device. Send 24 bit PCM data, and let the receiver
decide whether to apply 16 bit dithering.
I added 24 bit support a while ago, but it wasn't possible to force 24
bit output. Add 24 and 8 bit to the list of allowed sample sizes.
Although 8 bit audio isn't as widely used as 24 bit, there is no
reason to exclude it.
Splitting a frame between two buffer chunks causes distortion in the
output. MPD used to assume that the chunk size 1020 would never cause
splitted frames, but that isn't the case for 24 bit stereo (127.5
frames), and even less for files with even more channels.
Many command arguments must not be negative; add a separate
parser/checker function for that. For the same reason, add
check_bool(). This eliminates two strange special cases handlers from
check_int().
Pass index arguments as unsigned integers. They must not be negative,
and even if some caller accidently passes -1, it won't pass the bound
checks (since it's now 2**32-1).
There are some integers which have a "magic" -1 value which means
"undefined" or "nothing". All others can be converted to unsigned,
since they must not contain a negative number.
Also add names for "error" and "ok". I don't like passing anonymous
integer codes around.
This is not yet complete: lots of functions (e.g. in playlist.c)
follow the same convention of -1/0, and these have to be adapted, too.
spl_list() provides an interface for enumerating all stored playlists.
This separates the internal playlist logic from the protocol specific
function lsPlaylists().
The two functions clearStoredPlaylist() and addToStoredPlaylist()
don't belong into playlist.c. clearStoredPlaylist() was a wrapper for
spl_clear(), and is converted into a CPP macro for now.
The list of commands is known at compile time. Instead of creating a
linked list on startup, we can just register all commands in a static
sorted array.
The command pointers which are passed around aren't being modified -
in fact, no command pointer must be modified once it has been added to
the commandList.
Instead of manually calling memset(0) on the pcm_convert_state struct,
client code should use a library function from pcm_utils.c. This way,
we can change the semantics of the struct easily.
Casting a pointer to some sort of integer and formatting it into a
string isn't valid. A pointer derived from this hex string won't work
reliably. Since ffmpeg doesn't provide a nice API for passing our
pointer, we have to think of a different hack: ffmpeg passes the exact
URL pointer to mpdurl_open(), and we can make this string part of a
struct. This reduces the problem to casting the string back to the
struct.
This is still a workaround, but this is "sort of portable", unless the
ffmpeg people start messing with the URL pointer (which would be valid
according to the API definition).
Since ffmpeg svn r12865, you have to include libavcodec/avcodec.h
instead of avcodec.h. This cannot be checked at compile time, instead
we have to add a check to configure.ac. Viliam's original ffmpeg
plugin was based on the newer ffmpeg library, while my Debian
installation had the older version. My attempt to correct his include
statements wasn't correct after all.
{song,dir}vec_for_each each failed to gracefully handle deleted
files when iterating through. While we were thread-safe, we
were not safe within the calling thread. If a callback we
passed caused sv->nr to shring, our index would still increment;
causing files to stay in the database.
A way to test this is to remove 10 or so contiguous songs from a
>10 song directory.
Like the songvec nr_lock, only one lock is used for all
traversals since they're rarely changed. This only
projects traversals, but not the individual structures
themselves.
Use a literal in the struct declaration, and sizeof(client->buffer)
everywhere else. Also shrink the buffer from 40 kB to 4 kB. The
buffer must only be large enough to hold one line of input, and 4 kB
is still more than enough.
When adding a local file, clients have to use the "file" URI schema
described in RFC 1738 3.10. By adding this schema to "urlhandlers", a
client can detect whether this feature is available.
By default, glibc 2.8 hides struct ucred behind the _GNU_SOURCE
macro. I don't want to enable that globally, because it may encourage
the use of non-portable functions. Test if "struct ucred" is
available, and enable _GNU_SOURCE if required.
For details about that issue, see glib's bug database:
http://sources.redhat.com/bugzilla/show_bug.cgi?id=6545
Some functions assume that a song is not in the database when it is a
remote song. Based on that, they decide whether they are responsible
for freeing the song struct. Add a special function which checks
whether a song is in the database (currently equal to song_is_file()).
GLib provides an easier API for character set conversion than iconv().
Use g_convert() / g_convert_with_fallback() for all character
conversions. We should optimize the path.h API later to return a
newly allocated buffer, so we can just pass GLib's return value.
GLib is a nice and portable utility library. We are going to use it
from now on, and eliminate a lot of duplicated code from MPD. Why
invent the wheel again and again?
Use memchr() instead of manually traversing the input buffer. Update
the client's properties after all commands have been processed. Check
for buffer overflow once.
The caller already knows the protocol family, and we can eliminate the
complicated switch statement in establishListen() if we just pass this
information. This seems more robust.
"idle" waits until something noteworthy happens on the server,
e.g. song change, playlist modified, database updated. This allows
clients to keep up to date without polling.
Added mpd.conf options for disabling automatic resamling, sample
format and channel conversion. This way, users may choose to override
ALSA's automatic resampling, and use libsamplerate instead.
This git branch has become a real MPD fork now. Time to change the
package name to the code name "mpd-mk". Set the version number to
"0.14~git" to mark this as a non-released version.
Don't follow relative symlinks which point into the music directory.
This allows you to organize music with symbolic links, without MPD
managing separate copies of each song.
The mapper library maps directory and song objects to file system
paths. With this central library, the code mixture in path.c should
be cleaned up, and we will be able to add neat features like aliasing.
isMusic() used to be a very inefficient function: with every
invocation, it did another stat() on the specified file. There is
only one caller, do the stat() there manually and use hasMusicSuffix()
instead of isMusic().
By always creating the parent directory, we can use delete_name_in()
without further lookups. The parents which may non exist will be
pruned later. An update request for a non-existing or empty directory
should be quite unusual, so this doesn't add any measurable overhead.
In order to optimize buffer usage, pass only the base file name to
updateInDirectory(). This way, updateInDirectory() may choose when to
allocate a larger buffer for the full path.
It is invalid to pass a path with the wrong dirname to dirvec_find().
To be able to find a subdirectory only by its basename, compare only
the basename of both paths.
The only caller of deletePlaylist() appends PLAYLIST_FILE_SUFFIX, so
we can be sure it's already there. We don't need to stat the file,
since unlink() does all the checking.
Commit 80a2c937 broke resume after pause: it cleared the
input_audio_format when it attempted to simplify a complicated
expression. Don't clear it, just assign input_audio_format if a new
format was specified.
We only need to lock sv->nr changes to prevent traversals ( why
it's called "nr_lock"). free(3) is a "slow" function on my
system; so we can avoid unnecessarily holding a lock long for
longer than needed.
If the sample format isn't supported by the device (i.e. 24 bit on
low-end sound chips), fall back to 16 bit output. There is code in
pcm_utils.c which converts PCM data to 16 bit.
Convert any number of channels to stereo. In fact, this isn't really
stereo, it's rater mono blown up to stereo. This patch should only
make it possible to play 5.1 files at all; "real" conversion to stereo
should be implemented, but for now, this is better than nothing.
In order to be able to deal with non-trivial conversions,
pcm_convertChannels() needs to know both the input and the output
channel count. Simplify buffer allocation in that function.
Moved code from pcm_convertChannels() to pcm_convert_channels_1_to_2()
and pcm_convert_channels_2_to_1(). Improved the quality of
pcm_convert_channels_2_to_1() by calculating the arithmetic mean value
of both samples.
buffered_before_play was copied to struct player because it was used
to disable buffering when seeking. Instead of mainaining a copy of
this number, move just the flag to the player struct.
Renamed audio_configFormat to configured_audio_format. Renamed
audio_buffer.format to input_audio_format. Simplified its
initialization in openAudioDevice().
audio.c maintained one of MPD's many layers of audio buffers. It was
without any benefit, since playAudio() can simply send the source
buffer directly to the audio output plugin.
QUEUE adds a new song to the player's queue. CANCEL clears the queue.
These two commands replace the old and complex queueState and
queueLockState code.
Simplify and merge several if clauses before the clearPlayerQueue()
invocation. Call clearPlayerQueue() only if a song is actually
queued; add an assertion for that in clearPlayerQueue().
This variable is superfluous, it is only used to copy its value to
player_control.totalTime. Since the original source of this value
(song->tag->time) will still be available at this point, we can safely
remove fileTime.
Revert e4f5d6bd "re-enable-nonblocking, but sleep if busy".
Non-blocking mode with manual sleeping doesn't help at all (by the
way, the patch should have used snd_pcm_wait() instead of
my_usleep()). ALSA knows much more about the hardware quirks, so we
just let it do the job.
Leftover from the output API changes: oss_open_default() was changed
to return a void*, but it still returned "0" to report success.
Report the OssData pointer instead.
The decoder was woken up after each chunk which had been played. That
caused a lot of superfluous context switches. Wake up the decoder
only when a certain amount of the buffer has been consumed. This
formula is somewhat arbitrary, and has to be proven experimentally.
The mp3 plugin did not use the MAD_NCHANNELS() value correctly: when a
stream was not stereo, it was assumed to be mono, although the correct
number was passed to MPD. libmad doesn't support more than 2
channels, but this change allows gcc to optimize its inlining
strategy.
The dithering function audio_linear_dither() worked for signed 16 bits
only anyway, having a variable "bits" just disables important gcc
optimizations.
A frame contains one sample per channel, thus it is sample_size *
channels. This patch includes some cleanup for various locations
where the sample size for 24 bit audio was still 3 bytes (instead of
4).
There is only once update thread at a time. Make the "modified" flag
global and remove the return values of most functions. Propagating an
error is only useful for updateDirectory(), since updateInDirectory()
will delete failed subdirectories.
The documentation for directory_update_init() was incorrect: a job ID
must be positive, not non-negative. If the update queue is full and
no job was created, it makes more sense to return 0 instead of -1,
because it is more consistent with the return value of isUpdatingDB().
pthread_join() expects a "pointer to a pointer" parameter, but it got
a "pointer to an enum". On AMD64, an enum is smaller than a pointer,
leading to a buffer overflow.
In updateInDirectory(), add new directories immediately and
delete them when they turn out to be empty. This simplifies the code
and allows us to eliminate addSubDirectoryToDirectory().
If the user requests database update during startup, call
directory_update_init(). This should be changed to fully asynchronous
update later.
For this to work, main_notify has to be initialized before db_init().
The algorithm in addDirectoryPathToDB() can be simplified further if
it is combined with the function addParentPathToDB(). Since there is
no other caller of addDirectoryPathToDB(), we can do that. This saves
another large stack buffer.
This recursive function is very dangerous because it allocates a large
buffer on the stack in every iteration. That may be misused to
generate a stack overflow.
When a directory failed to update, it was removed from the database,
without freeing all children and songs (memory leak), and without
locking (race condition). Introduce the functions clear_directory()
and delete_directory(), which do both.
Don't use db_get_directory() and traverse the full path with every
directory being loaded. Just see if the current parent contains the
entry. Everything else would be invalid anyway..
A manipulated database could trigger an assertion failure, because the
parent didn't match. Do a proper check if the new directory is within
the parent's. This uses FATAL() to bail out, so MPD still dies, but
it doesn't crash.
Remove clutter from directory.c. Everything which saves or loads
to/from the hard disk goes to directory_save.c, and code which sends
directory information to the client is moved into directory_print.c.
Having an array with disabled entries sucks. Removed that
DISABLED_SHOUT_ENCODER_PLUGIN macro, and fill the plugin list only
with plugins which are actually enabled. This should be done for all
plugin types.
"volume" was passed as an unsigned integer, which is correct. It's
just that when it was multiplied with the sample value, the whole
operation was changed to unsigned, breaking the algorithm (and Qball's
ears). Internally change "volume" to signed.
With commit 6dcd7fea (if I am not mistaken) the error returned when
you try to save to an existing playlist is wrong. Instead of
MPD_ACK_ERROR_EXIST, MPD_ACK_ERROR_NO_EXIST is returned. This is
obviously wrong and breaks gmpc.
Commit 0bfe7802 broke update for new files in the root directory,
because music_root->path was an empty string and not NULL. There were
some NULL tests missing. Change them to !isRootDirectory(path)
instead of path!=NULL.
Taming the directory.c monster, part II: move the database management
stuff to database. directory.c should only contain code which works
on directory objects.
Instead of returning 0 or -1, return true on success and false on
failure. This seems more natural, and when the C library was
designed, there was no "bool" data type.
Provide separate constructors for creating a remote song, a local
song, and one for loading data from a song file. This way, we can add
more assertions.
exploreDirectory() duplicates some code in updateDirectory(). Merge
both functions, and use directory_is_empty() to determine whether
update or explore mode should be used.
The source directory.c mixes several libraries: directory object
management, database management and database update, resulting in a
1000+ line monster. Move the whole database update code to update.c.
Having all functions as static (non-inline) functions generates GCC
warnings, and duplicates binary code across several object files.
Most of dirvec's methods are too complex for becoming inline
functions. Move them all to dirvec.c and publish the prototypes in
dirvec.h.
pthread_cond_wait() may wake up spuriously. To prevent superfluous
state checks, loop until the "pending" flag becomes true. Removed the
dangerous assertion.
This makes the update code thread-safe and doesn't penalize
the playlist code by complicating it with complicated and
error-prone locks (and the associated overhead, not everybody
has a thread-implementation as good as NPTL).
The update task blocks during the delete; but the update task is
a slow task anyways so we can block w/o people caring too much.
This was also our only freeSong call site, so remove that
function.
Note that deleting entire directories is not fully thread-safe,
yet; as their traversals are not yet locked.
Only one lock is used for all songvec traversals since
they're rarely changed. Also, minimize lock time and
release it before calling iterator functions since they
may block (updateSongInfo => stat/open/seek/read).
This lock only protects songvecs (and all of them) during
traversals; not the individual song structures themselves.
* Add missing headers in Makefile.am
* remove mp4ff.dsp (Win32 crap)
* Add scripts, m4, bs, autogen.sh to allow for hotfixes by the
SCM-challenged. (downloading the source via git is NOT a
lightweight operation for everybody).
We already know if a song is a URL or not based on whether it
has parentDir defined or not. Hopefully one day in the future
we can drop HTTP support from MPD entirely when an HTTP
filesystem comes along and we can access streams via open(2).
The "packed" attribute may have negative side effects on performance.
Remove the "packed" attribute, and increase the size of "song.url" to
a multiple of the machine word size.
This got broken when listHandlerFunc was removed. Since we no
longer need it and it's confusing, remove processCommandInternal
and just use process_command.
Instead of allocating a new one, just reuse an existing
one if one is found when rereading the DB. This is a small
makes the previous commit work on subdirectories
of the root music directory.
[1] "song: better handling of existing songs when rereading DB"
commands should really not behave differently if they're issued
inside a command list or not; so stop having special handler
functions to deal with them. "update" was the only command
that used this functionality and I changed that in the last
commit to serialize access.
Now the "update" command can be issued multiple times regardless
of whether the client is in list mode or not.
We serialize the update tasks to prevent updates from trampling
over each other and will spawn another update task
once the current one is finished updating and reaped.
Right now we cap the queue size to 32 which is probably enough (I
bet most people usually run update with no argument anyways);
but we can make it grow/shrink dynamically if needed. There'll
still be a hard-coded limit to prevent DoS attacks, though.
Add support for 24 bit PCM samples to all functions. Note that
pcm_convertAudioFormat() converts 24 bit samples to 16 bit; to
preserve full quality, support for "real" 24 bit conversion should be
added.
Moved code into separate bit specific functions:
- pcm_volumeChange() -> pcm_volume_change_X()
- pcm_add() -> pcm_add_X()
- pcm_convertTo16bit() -> pcm_convert_8_to_16()
pcm_mix() might overflow the destination buffer if it is smaller than
the second buffer. This is ok because the physical buffer size passed
by cross_fade_apply() is always big enough, but clutters pcm_mix()
with complicated length checks and contains a dangerous buffer
overflow pitfall. Simplify pcm_mix()/pcm_add() and pass only the
smaller buffer size; let cross_fade_apply() do the memcpy().
pause() puts the audio output into pause mode: if supported, it may
perform a special action, which keeps the device open, but does not
play anything. Output plugins like "shout" might want to play silence
during pause, so their clients won't be disconnected. Plugins which
do not support pausing will simply be closed, and have to be reopened
when unpaused.
This pach includes an implementation for the shout plugin, which
sends silence chunks.
The function audio_output_is_pending() returns whether there is a
pending command. This is useful for output plugins as a break
condition for longer loops.
The old struct initializers are error prone and don't allow moving
elements around. Since we are going to overhaul some of the APIs
soon, it's easier to have all implementations use C99 initializers.
Since we use a C99 compiler now, we can assert that the C99 standard
headers are available, no need for complicated compile time checks.
Kill mpd_types.h.
Having an enum type is much nicer than an anonymous integer plus CPP
macros. Note that the old code didn't save any space by declaring the
variable 8 bit, due to padding.
Seeing the "mpd_" prefix _everywhere_ is mind-numbing as the
mind needs to retrain itself to skip over the first 4 tokens of
a type to get to its meaning. So avoid having extra characters
on my terminal to make it easier to follow code at 2:30 am in
the morning.
Please report any new issues you may come across on Free
toolchains. I realize how difficult it can be to build/maintain
cross-compiling toolchains and I have no intention of forcing
people to upgrade their toolchains to build mpd.
Tested with gcc 2.95.4 and and gcc 4.3.1 on x86-32.
tfing wrote:
> I have quite some files with an empty album tag as they do not come
> from a particular album.
>
> If I want to look for those files and browse them, this happens:
> :: nc localhost 6600
> OK MPD 0.12.0
> find album ""
> ACK [2@0] {find} too few arguments for "find"
>
> I'd like to be able to browse those files in a client like gmpc.
> So these 2 items would have to be developed:
> - list album should report that some files have an empty tag
> - it should be possible to search for an empty tag with the find command
Patch-by: Marc Pavot
ref: http://musicpd.org/mantis/view.php?id=464
This only breaks "update" under list command mode and
no other commands. This can be done more optimally
without the extra heap allocation via xstrdup(); but is
uncommon enough to not matter.
It was a huge confusing mess of parameter passing around
and around. Add a few extra assertions to ensure we're
handling parent/child relationships properly.
This is like basename(3) but with predictable semantics independent
of C library or build options used. This is also much more strict
and does not account for trailing slashes (mpd should never deal with
trailing slashes on internal functions).
If we updated the mpd metadata database; then there's a chance
some of those songs in the playlist will have updated metadata.
So be on the safe side and increment the playlist version number
if _any_ song changed (this is how all released versions of mpd
did it, too).
This bug was introduced recently when making "update" threaded.
Thanks to stonecrest for the bug report.
Make the code more readable by moving the range checks to pcm_range().
gcc does quite a good job at optimizing it: the resulting binary is
exactly the same, although it contains a parametrized shift instead of
hard-coded boundaries.
There was a known deadlocking bug in the notify library: when the
other thread set notify->pending after the according check in
notify_wait(), the latter thread was deadlocked. Resolve this by
synchronizing all accesses to notify->pending with the notify object's
mutex. Since notify_signal_sync() was never used, we can remove it.
As a consequence, we don't need notify_enter() and notify_leave()
anymore; eliminate them, too.
During debugging, I found a deadlock between flushAudioBuffer() and
the audio_output_task(): audio_output_task() didn't notice that there
is a command, and flushAudioBuffer() waited forever in notify_wait().
I am not sure yet what is the real cause; work around this for now by
waking up non-finished audio outputs in every iteration.
Due to a merge error, I broke the function handleUpdate(). It did not
do anything for the global update, and it did not send a proper
response to the client. This patch fixes both bugs.
To check whether a device is really on or off, we should rather check
audio_output.open, instead of managing another variable. Wrap
audio_output.open in the inline function audio_output_is_open() and
use it instead of DEVICE_ON and DEVICE_OFF.
Send an output buffer to all output plugins at the same time, instead
of waiting for each of them separately. Make several functions
non-blocking, and introduce the new function audio_output_wait_all()
to synchronize with all audio output threads.
We have eliminated direct accesses to the audio_output struct from
the all output plugins. Make it opaque for them, and move its real
declaration to output_internal.h, similar to decoder_internal.h.
Pass the opaque structure to plugin.init() only, which will return the
plugin's data pointer on success, and NULL on failure. This data
pointer will be passed to all other methods instead of the
audio_output struct.
The JACK output plugin needs to reset its "opened" flag when the JACK
server fails. To prevent it from accessing the audio_output struct
directly introduce the API function audio_output_closed().
Reduce direct accesses to the audio_output struct from the plugins:
this time, eliminate all accesses to audio_output.name. The name is
required by some plugins for log messages.
Pass the globally configured audio_format as a const pointer to
plugin.init(). plugin.open() gets a writable pointer which contains
the audio_format requested by the plugin. Its initial value is either
the configured audio_format or the input file's audio_format.
To keep I/O nastiness and latencies away from the core, move the audio
output code to a separate thread, one per output. The thread is
created on demand, and currently runs until mpd exits.
Since flacSendChunk() is a trivial function and is only used in one
location, move the code there. The advantage is that calling
decoder_data() directly returns the decoder_command value, so we can
eliminate one decoder_get_command() call.
Support for bit rates except 16 bits (and 8 bits on little endian) has
always been broken. Since we added optimized functions for 8, 16,
24/32 bits, we can remove the generic flac_convert() function.
Instead of removing it, convert it to a wrapper function for
flac_convert_*().
flac_convert_16() runs a lot faster than the generic (and quite buggy)
function flac_convert(). flac_convert_16() is only used for
non-stereo files, since there is already flac_convert_stereo16().
By mistake, I casted the sample value to uint16_t, which is wrong.
This patch simplifies the code by using a int16_t pointer instead of
casting to int16_t* every time.
There is still a lot of duplicated code in flac_plugin.c and
oggflac_plugin.c. Move code from flac_plugin.c to _flac_common.c, and
use the new function flac_common_write() also in oggflac_plugin.c,
porting lots of optimizations over to it.
The inline function audio_format_sample_size() calculates how many
bytes each sample consumes. This function already takes into account
that 24 bit samples are 4 bytes long, not 3.
Instead of letting ALSA block for us (and potentially allowing
something stupid on certain hardware or drivers), we do the
sleeping ourselves. We calculate the sleep to be a fraction of
period_time to avoid oversleeping (and thus audible skipping).